Thermal Conductivity of Straw Bales: Full Size Measurements Considering the Direction of the Heat Flow
Article dans une revue avec comité de lecture
Auteur
Résumé
The thermal conductivity of straw bales is an intensively discussed topic in the international straw bale community. Straw bales are, by nature, highly heterogeneous and porous. They can have a relatively large range of density and the baling process can influence the way the fibres are organised within the bale. In addition, straw bales have a larger thickness than most of the insulating materials that can be found in the building industry. Measurement apparatus is usually not designed for such thicknesses, and most of the thermal conductivity values that can be found in the literature are defined based on samples in which the straw bales are resized. During this operation, the orientation of the fibres and the density may not be preserved. This paper starts with a literature review of straw bale thermal conductivity measurements and presents a measuring campaign performed with a specific Guarded Hot Plate, designed to measure samples up to 50 cm thick. The influence of the density is discussed thoroughly. Representative values are proposed for a large range of straw bales to support straw-bale development in the building industry.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecturePEUZIN-JUBERT, Manon; NOZAIS, Dominique; MARI, Jean-Luc; PERNOT, Jean-Philippe; POLETTE, Arnaud (Elsevier BV, 2021-12)At present, optical sensors are being widely used to realize high quality control or reverse engineering of products, systems, buildings, environments or human bodies. Although the intrinsic characteristics of such ...
-
Article dans une revue avec comité de lectureSELMI, Jaouher; COSTES, Jean-Philippe; POULACHON, Gérard; CARRAS, Patrice; LORONG, Philippe (Springer Verlag, 2016)This article presents an original study about the dynamic of a machining operation based on the coupling receptance methodology. The Frequency Response Function (FRF) of a machine tool is numerically coupled with the FRF ...
-
Article dans une revue avec comité de lectureSELMI, Jaouher; COSTES, Jean-Philippe; POULACHON, Gérard; CARRAS, Patrice; LORONG, Philippe (Springer Verlag, 2016)This article presents an original study about the dynamic of a machining operation based on the coupling receptance methodology. The Frequency Response Function (FRF) of a machine tool is numerically coupled with the FRF ...
-
Communication avec acteUne méthodologie est proposée dans cet article dans le but de faciliter l’évaluation de la stabilité d’une opération de fraisage, pour une broche, un outil et une position connue de la broche dans son espace de travail. ...
-
Communication avec acteSELMI, Jaouher; COSTES, Jean-Philippe; POULACHON, Gérard; CARRAS, Patrice; LORONG, Philippe (MM Science Journal, 2014)It is proposed to apply a methodology in order to evaluate the ability of different machining systems (Spindle/Tool) to run a reaming process in a stable way.The methodology is based on an experimental measurement of the ...