Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking
Article dans une revue avec comité de lecture
The goal of this work was the determination of lattice strains distribution in two phases of duplex steel during plastic necking. Subsequently, the stress heterogeneity in the neck was studied in order to determine the reason for the damage initiation and to verify the hypothesis that the damage begins in the ferritic phase. To do this, X-ray synchrotron radiation was used to scan the ‘in situ’ variation of the interplanar spacings along the necking zone for samples subjected to tensile loading. A self-consistent model and FEM simulation were applied for the experimental data interpretation. It was found that for advanced necking the phase lattice strains, especially those measured at some distance from the neck centre, show a large inversion of the loads localised in both phases compared to the undamaged state (the lattice strains in the ferrite become smaller than in the austenite). This effect indicates stress relaxation in the ferrite which is connected with the damage phenomenon. Correlation of the experimental results with the modelling shows that the value of von Mises stress is responsible for the initiation of the ferritic phase softening.
Showing items related by title, author, creator and subject.
Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model Article dans une revue avec comité de lectureBACZMANSKI, Andrzej; ZHAO, Yuchen; GADALIŃSKA; LE JONCOUR, Lea; WROŃSKI, Sebastian; BRAHAM, CHEDLY; PANICAUD, Benoît; FRANÇOIS, Manuel; BUSLAPS, Thomas; SOLODUCHA, K.a (Elsevier, 2016)The paper deals with damage and fracture behavior of ductile metals caused by stress-state-dependent growth and coalescence of defects on the micro-level. The continuum damage model has been generalized to take into account ...
Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model Article dans une revue avec comité de lectureBACZMANSKI, Andrzej; ZHAO, Yuchen; GADALIŃSKA, E; LE JONCOUR, Léa; WROŃSKI, Sebastian; PANICAUD, Benoît; BRAHAM, Chedly; FRANÇOIS, Manuel; BUSLAPS, Thomas; SOLODUCHA, K. (Elsevier, 2016)In situ time of flight neutron diffraction and X-ray synchrotron diffraction methods were applied to measure lattice strains in duplex steels during a tensile test. The experimental results were used to study slips on ...
Article dans une revue avec comité de lectureLE JONCOUR, Léa; PANICAUD, Benoît; BACZMANSKI, Andrzej; FRANÇOIS, Manuel; BRAHAM, Chedly; PARADOWSKA, Anna Maria; WROŃSKI, Sebastian; CHIRON, Rémi (Elsevier, 2010)Different experimental approaches have been performed in order to extract damage at several scales. In this paper two experimental methods are treated. Neutron diffraction coupled with tensile test has been performed to ...
Stress measurements by multi-reflection grazing-incidence X-ray diffraction method (MGIXD) using different radiation wavelengths and different incident angles Article dans une revue avec comité de lectureMARCISZKO, Marianna; BACZMANSKI, Andrzej; BRAHAM, Chedly; WROBEL, Mirosław; WRONSKI, Sebastian; CIOS, Grzegorz (Elsevier, 2017)The presented study introduces the development of the multi-reflection grazing-incidence X-ray diffraction method (MGIXD) for residual stress determination. The proposed new methodology is aimed at obtaining more reliable ...
Problem of elastic anisotropy and stacking faults in stress analysis using multireflection grazing-incidence X-ray diffraction Article dans une revue avec comité de lectureMARCISZKO, Marianna; BACZMANSKI, Andrzej; MIROSŁAW, Wrobel; SEILER, Wilfrid; BRAHAM, Chedly; WRONSKI, Sebastian; WAWSZCZAK, Roman (International Union of Crystallography, 2015)Multireflection grazing-incidence X-ray diffraction (MGIXD) was used to determine the stress- and strain-free lattice parameter in the surface layer of mechanically treated (polished and ground) tungsten and austenitic ...