Characterisation of R.F. magnetron sputtered Cr-N, Cr-Zr-N and Zr-N coatings
Article dans une revue avec comité de lecture
Binary Cr-N, Zr-N and Cr-Zr-N films were synthesised using a R.F. reactive magnetron sputtering technique by co-sputtering Cr and Zr. The crystalline structure, morphology, mechanical and tribological properties of the films as a function of Zr content were characterised by X-ray diffraction, microanalysis X (WDS, EDS), X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, nanoindentation, scratch adhesion and pin-on-disc sliding wear tests. The residual stress was calculated with the Stoney formula. The Cr-Zr-N films exhibit a two-phase microstructure, containing a cubic (CrN, ZrN) with hexagonal (Cr2N, Zr2N) phases, as shown by X-ray diffraction. As the Zr content increased, a columnar and compact structure is developed with a low surface roughness. The results reveal that the mechanical and tribological properties of the films were found to depend on the Zr content and the hardness (maximum 26.3 GPa) is greatly improved in comparison with CrN and ZrN films, especially at 31 at.-% Zr. In the scratch test, the hardest film (Cr0.18Zr0.31N0.47) exhibited an adhesive failure at Lc2 = 34.3 N.
Files in this item
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ZAIRI, Amel; ABDUL SAMAD, Mohamed; NOUVEAU, Corinne; TOUHAMI, Mohamed Zine; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2018)In the present study, the effect of thermal treatment on the mechanical and structural properties of chromium carbide coatings with different thicknesses is evaluated. The coatings were deposited by cathodic magnetron ...
Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; IOST, Alain; MOHAMED ZINE, Touhami; MONTAGNE, Alex; NOUVEAU, Corinne (Elsevier, 2017)This study aims to examine the effect of replacing vanadium by niobium and iron on the tribological behavior of hot-isostatic-pressed titanium alloy (Ti–6Al–4V) biomaterial, using a ball-on-disk-type oscillating tribometer, ...
Synthesis, microstructural and tribological characterization of calcined nano-bioceramic α- al2o3, sintered at different temperatures Communication sans acteFELLAH, Mamoun; AISSANI, Linda; LABAIZ, Mohamed; NOUVEAU, Corinne; IOST, Alain; MONTAGNE, Alex; ABDUL SAMAD, Mohamed; LAKMINE, F. (2016)The current research was undertaken to study the improvement of the tribological behavior of nanocrystalline bioceramic, α-alumina sample, produced by the calculations of gibbsite at different temperatures (300 to 1200°C), ...
Article dans une revue avec comité de lectureAISSANI, Linda; FELLAH, Mamoun; NOUVEAU, Corinne; SAMAD, Mohamed Abdul; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2017)Cr–Zr–N films have been synthesised using R.F reactive magnetron sputtering system on Si (100) wafer and XC100 steel substrate without heating. The structural, mechanical and friction coefficient evolution as a function ...
Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; PURNAMA, Agung; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain; NOUVEAU, Corinne (Wiley, 2018)Nanostructured Cr‐Zr‐N thin film with different Zr content (0 to 48.8 at.%) was deposited, using an RF magnetron‐sputtering technique. The structural evolution and morphological changes were performed. The tribological ...