Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys
Article dans une revue avec comité de lecture
Auteur
SIREDEY-SCHWALLER, NathalieHAMEL-AKRÉ, JohannPELTIER, LaurentHAZOTTE, AlainBOCHER, PhilippeRésumé
Various Ni-Si-Cr-B brazing alloys with a similar boron content (3 wt%) are investigated. Alloy compositions cover a section of the quaternary phase diagram that connects BNi-3 to BNi-9 ternary alloys for industrial use. Samples were melted and solidified at low cooling rate (1 K/min) under secondary vacuum to minimize oxidation and the metastable phase formation. Transformation temperatures, microstructures, and chemical analyses are reported. Experimental conditions were found to play a significant role on the accuracy of obtained data. Thermodynamic data were collected upon heating. Before analyzing quaternary alloys, the results of investigated ternary alloys were compared with the literature and discussed.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture(MDPI, 2018)The variations of the mechanical properties of the CoCrFeMnNi high entropy alloy (HEA) during groove cold rolling process were investigated with the aim of understanding their correlation relationships with the crystallographic ...
-
Article dans une revue avec comité de lecture(Elsevier BV, 2022)The success of biomedical implantation is linked to osseointegration, depending on the mechanical loading of the bone interface. The large difference in stiffness between the host bone (30 GPa) and the usual implant ...
-
Article dans une revue avec comité de lecture; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
RICHAUD, Emmanuel (Elsevier, 2021)
The need for personal protective equipment increased exponentially in response to the Covid-19 pandemic. To cope with the mask shortage during springtime 2020, a French consortium was created to find ways to reuse medical ... -
Article dans une revue avec comité de lecture; ; ;ETIENNE, Alain (Ablex Publishing Corporation, 2016)
Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardising and controlling operator work. This contrasts with the ergonomic view of the ...
-
Article dans une revue avec comité de lecture; ; ; ;HAUVILLE, Frederic (RINA, 2017)
Navigation systems used in racing boats require sensors to be more and more sophisticated in order to obtain accurate information in real time. To meet the need for accuracy of the surface speed measurement, the mechanical ...