A New Method to Fabricate Fe-TiC Composite Using Conventional Sintering and Steam Hammer
Type
Articles dans des revues avec comité de lectureDate
2017Journal
International Journal of Engineering Research in AfricaAbstract
The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturing method. The latter is based on two cumulative processes; a conventional sintering (transient liquid phase sintering) and a hot forging with steam hammer respectively. The blinder phase of the studied simples is varied from carbon steel to high alloy steel using alloying additive powders. The obtained outcomes showed that after the sintering process, the relative density of the performed simples is improved from 86% to 95.8% without any densification process. Otherwise, in order to ensure maximum densification and enhance in addition the solubility of the alloying additives the hot forging process is then applied. Indeed, the final obtained composite product is a TiC-strengthened steel with a relative density around 99% (about 6.5 g/cm3 of density) wherein 30% (wt.) of spherical and semi-spherical TiC particles are homogeneously distributed in the metal matrix.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
LAHOUEL, Ali; BOUDEBANE, Saïd; IOST, Alain; MONTAGNE, Alex (Trans Tech Publications, 2017)The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturing method. The latter is based on two cumulative processes; a conventional sintering (transient liquid phase sintering) and ...
-
GRAIRIA, Said; CHRAIT, Yacine; MONTAGNE, Alex; IOST, Alain; CHICOT, Didier (2016)La détermination de l’adhérence d’un béton sur une armature en acier fait très souvent appel à des techniques difficiles à mettre en œuvre et nécessite la plupart du temps une préparation longue et complexe de l’échantillon. ...
-
FELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohamed; MECHACHETI, Said; TOUHAMI, Mohamed Zine; MONTAGNE, Alex; IOST, Alain (Taylor Francis, 2017)Binary Cr-N, Zr-N and Cr-Zr-N films were synthesised using a R.F. reactive magnetron sputtering technique by co-sputtering Cr and Zr. The crystalline structure, morphology, mechanical and tribological properties of the ...
-
ABIB, Hocine; IOST, Alain; MONTAGNE, Alex; RAHMOUN, Khadidja; AYACHI, Boubakeur; VILCOT, Jean-Pierre (Elsevier, 2017)In this investigation, the mechanical properties of the different layers composing a CuIn1 − xGaxSe2 (CIGS) based solar cell were studied. Magnetron sputtering technique was used for the deposition of these layers except ...
-
FAKIRI, Souheyla; IOST, Alain; MONTAGNE, Alex; RAHMOUN, Khadidja; ZIOUCHE, Katir (2016)Dans la technologie des semi-conducteurs, le silicium poreux (SiP) trouve un grand intérêt notamment pour ses propriétés thermiques ou même diélectriques qui jouent un rôle important notamment pour la fabrication de ...