Analytical and numerical study based on experimental investigation of different curved sandwich composites manufactured by filament winding process
Article dans une revue avec comité de lecture
Sandwich structures, due to their high stiffness versus lightness ratio, are used progressively in high performance products. In order to design these structures with the most appropriate dimensions and material combinations, relevant mechanical properties must be well understood. This work aims to estimate the elastic properties of composite sandwiches from a curved structure taking into account the manufacturing process. In the case of filament winding process, specimens are necessarily cylindrical or barrel extracted. In our case, these types of structures are tested in 3- and 4-point bending to analyze their behavior experimentally using predictive models and design rules. Different conEgurations are adopted for bending tests to analyze and discuss global mechanical behavior. Furthermore, the acoustic emission technique is used to detect the initial appearance of damage mechanisms and to examine their evolution in terms of amplitude peaks and localization. Finally, a correlation between these acoustic emission signals and the damage initiation mechanisms is proposed, considering their effects on the mechanical behavior of each tested material.
Files in this item
Showing items related by title, author, creator and subject.
Conférence invitéeCROZATIER, Mathilde; TEREKHINA, Svetlana; DAU, Frédéric; GUILLAUMAT, Laurent (2016)Mechanical behavior of composite laminates depends strongly on the manufacturing process. It is necessary to use representative samples of the material, and therefore of the process. In the case of filament winding, specimens ...
The effect of build orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer Article dans une revue avec comité de lectureTEREKHINA, Svetlana; TARASOVA, Tatiana; EGOROV, Sergei; SKORNYAKOV, Innokentiy; GUILLAUMAT, Laurent; HATTALI, Lamine (Elsevier BV, 2020)The present paper aims to study the effect of manufacturing build orientation on both flexural quasi-static and fatigue behaviours of semi-crystalline polyamide 6 obtained by Fused Filament Fabrication (FFF), by considering ...
Flax Fibers Reinforced Thermoplastic Resin Based Biocomposites, a Future for Sustainable Composite Parts Communication avec acteGUILLAUMAT, Laurent; TEREKHINA, Svetlana; DERBALI, Imed; MONTI, Arthur; EL MAHI, Abderrahim; JENDLI, Zouhaier (EDP Sciences, 2018)One of the major challenges of thermoplastic matrix based composites is to manufacture finished parts both in one shot process and in a reduced time production. For this purpose, two techniques were developed to manufacture ...
Article dans une revue avec comité de lectureTEREKHINA, Svetlana; TARASOVA, Tatiana; EGOROV, Sergei; SKORNYAKOV, Innokentiy; GUILLAUMAT, Laurent; HATTALI, Lamine (Springer Science and Business Media LLC, 2021)The present paper aims to compare study the effect of porosity and degree of crystallinity on both quasi-static and fatigue behaviours of PA6 and PA12 specimens obtained by the fused filament fabrication (FFF). The glass ...
Influence Of Parameters On Mechanical Properties Of Thermoplastic Polymers Obtained By Fused Filament Fabrication (FFF) Communication avec acteTEREKHINA, Svetlana; HATTALI, Lamine; GUILLAUMAT, Laurent (Chinese Society for Composite Materials, 2017)Fused filament Fabrication (FFF) is one of the typical Rapid Prototyping (RP) process that can fabricate prototypes from various model materials. To predict the mechanical behaviour of FFF parts, it is necessary to understand ...