Phenomenological study of multivariable effects on exit burr criteria during orthogonal cutting of AlSi alloys using principal components analysis
TypeArticles dans des revues avec comité de lecture
During machining, burrs are produced along a part’s edges, which can affect a final product lifetime or its efficiency. Moreover, time-consuming and expensive techniques are needed to be applied to remove such burrs. Therefore, companies attempt to reduce burrs formation during machining by manipulating the cutting conditions. This study aims to analyze and quantify the effect of a wide number of parameters on burr formation, resulting from different mechanisms, during orthogonal cutting of AlSi alloys. A highly developed experimental methodology combining high-speed camera recording, laser scanning, and in situ deburring system is used for this study. A statistical analysis is then applied to evaluate relations between controlled parameters and the occurrence of exit burrs morphologies. The results show that the uncut chip thickness influences burr types distribution along the exit edge and chamfer geometry. Among the cutting parameters and tool geometry, tool rake angle is the main parameter affecting burr height. Finally, it is found that none of the burrs geometrical characteristics ranges are piloted by cutting parameters or tool geometry. The assumption of a possible microstructural influence on these outputs is made.
Files in this item
Showing items related by title, author, creator and subject.
Experimental Investigation and Modelling of Burr Formation during Orthogonal Cutting of A356+0.5Cu Aluminium Alloy RÉGNIER, Tristan; FROMENTIN, Guillaume; OUTEIRO, José; MARCON, Bertrand; D'ACUNTO, Alain; CROLET, Arnaud (2016)Burr formation during parts manufacturing is a significant problem that companies try to minimise or eliminate. The present work aims to study the burr formation mechanisms in a cast aluminium alloy. Orthogonal cutting ...
Etude de la formation des bavures en coupe orthogonale à l’outil carbure dans un alliage d’Aluminium – Silicium. RÉGNIER, Tristan; FROMENTIN, Guillaume; OUTEIRO, José; MARCON, Bertrand; D'ACUNTO, Alain; CROLET, Arnaud (2016)Le but de cet article est d’étudier l’influence des paramètres de coupe sur la formation des bavures en coupe orthogonale. Pour ce faire, une étude en rabotage est réalisée avec des plaquettes carbures, sur un alliage ...
Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy RÉGNIER, Tristan; FROMENTIN, Guillaume; MARCON, Bertrand; OUTEIRO, José; D'ACUNTO, Alain; CROLET, Arnaud; GRUNDER, Timothée (Elsevier, 2018)Burr formation during machining is an important issue in industry. It causes an additional deburring operation, which is time consuming and has a negative economic impact. This study aims to analyse burr formation mechanisms ...
Analysis and modeling of burr formation during the plane milling of cast aluminium alloy using Polycrystalline Diamond Tools BOURLET, Clément; FROMENTIN, Guillaume; HARIKA, Elias; CROLET, Arnaud (ASME, 2016)Burr formation is a significant problem during manufacturing, and leads to a lack of geometrical quality through the appearance of undesired and undefined shapes on the workpiece. Thus, understanding the burr formation and ...
YOUSFI, Mohammed; OUTEIRO, José; NOUVEAU, Corinne; MARCON, Bertrand; ZOUHAIR, Badr (Elsevier, 2017)Cryogenic assistance is used to improve machining performance and to enhance tool life under extreme contact conditions (pressure and temperature). This paper focuses on the influence of cryogenic cooling conditions using ...