An innovative method based on grain angle measurement to sort veneer and predict mechanical properties of beech laminated veneer lumber
TypeArticles dans des revues avec comité de lecture
This study proposes an innovative model based on local grain angle measurements to predict the modulus of elasticity of LVL made from beech. It includes a veneers sorting method industrially compatible thanks to its low computational time. For this study 41 LVL panels were prepared from 123 beech sheets of veneers. Local grain angle was obtained with a two dimensional scanner and veneer density was measured. Several models based on these measurements have been developed and their ability to predict the modulus of elasticity of LVL panels have been compared. The model based only on local grain angle measurements have been proven more efficient than models taking into account the veneer density. The proposed method can be used to sort veneer during the peeling process and grade the production of LVL panels to optimize their mechanical properties even for low-quality veneer.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood PURBA, Citra Yanto Ciki; POT, Guillaume; VIGUIER, Joffrey; RUELLE, Julien; DENAUD, Louis (Springer Nature, 2019)The first objective of this work was to study the influence of veneer quality on the mechanical properties of laminated veneer lumber (LVL) made of secondary quality hardwood. The second objective was to propose an adapted ...
QUINTERO REYES, Christian; DURIOT, Robin; POT, Guillaume; GIRARDON, Stéphane; DENAUD, Louis; LE ROY, Corentin; AUBAGNAC, Christophe; ROTH, Jérémy; RENAUDIN, Fabien; SAUVAT, Nicolas; MILLIEN, Anne; DUBOIS, Frédéric (2019)Dans ce papier sont présentés les premiers résultats d’une étude globale visant à consolider, puis proposer des règles de dimensionnement de ponts mixtes bois / béton collés. La liaison collée est explorée de manière ...
Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purpose VIGUIER, Joffrey; BOURREAU, Damien; BOCQUET, Jean-François; POT, Guillaume; BLERON, Laurent; LANVIN, Jean-Denis (Springer, 2017)This study proposes a model using data from a scanner (X-ray and grain angle measurements) to perform strength grading. The research also includes global measurements of modulus of elasticity (obtained by vibrations and ...
BESSEAU, Benoît; POT, Guillaume; COLLET, Robert; VIGUIER, Joffrey (2019)Scanner measurements allow knot detection and machine strength grading on sawn timber, which answers the construction and sawmilling industry needs at high production rates. In particular, laser scanners measure fiber ...
Performance of strength grading methods based on fibre orientation and axial resonance frequency applied to Norway spruce (Picea abies L.), Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) and European oak (Quercus petraea (Matt.) Liebl./Quercus robur L.) OLSSON, Anders; POT, Guillaume; VIGUIER, Joffrey; FAYDI, Younes; OSCARSSON, Jan (Springer Nature, 2018)Key message Machine strength grading of sawn timber is an important value adding process for the sawmilling industry. By utilizing data of local fibre orientation on timber surfaces, obtained from laser scanning, more ...