Quantitative and representative adherence assessment of coated and uncoated concrete-formwork
Article dans une revue avec comité de lecture
Résumé
Nowadays buildings construction is performed by pouring concrete into molds called formworks that are usually prefabricated metallic modules. Defects such as stripping may possibly form during the removal of the formwork if the interfacial bonding between the concrete and the formwork is high. Making use of a new pull-off tensile test designed in our laboratory, a correlation has been established between the formwork surface functional signatures and its adherence propensity to concrete. The originality of this near-to-surface test was to characterize the concrete-to-formwork adherence by measuring the required force to pull the concrete from the formwork surface. The design of the test coupon was validated by finite element analysis that proves the small deformation of the tested formwork specimen under the tensile loading and the homogeneity of the applied tensile stress at the interface. The interfacial bonding to concrete has been compared between bare and coated formwork. Both metallic and polymer coatings have been studied. The analyses of the pull-off test results enabled us to understand the bonding mechanisms at the concrete-coating interfaces. The pull-off tensile test was proven capable of ranking formwork coatings according to their adherence to concrete.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureSPITZ, N.; MEZGHANI, Sabeur; EL MANSORI, Mohamed; CONIGLIO, Nicolas; MONTAGNE, Alex (Elsevier, 2018)The sticking of the concrete on metallic formworks during building construction generates many concrete wall defects. Several solutions have been proposed, among which surface lubrication and polymeric coatings are commonly ...
-
Article dans une revue avec comité de lectureThe nature of friction of vegetal fiber and polymeric matrix in bio-composite materials is very important for many industrial applications. In order to design natural fiber composites for structural applications, the ...
-
Article dans une revue avec comité de lectureSurface texturation at micro- and meso-scales plays an important role in applications where cosmetic, aesthetic and self-cleaning functionalities are specified. This research paper deals with a multiscale surface, in which ...
-
Article dans une revue avec comité de lectureConcrete, a commonly used material in the construction industry, interacts with metallic surfaces such as formwork during pouring and reinforced bar during lifespan. Formworks are designed to minimize hardened concrete ...
-
Article dans une revue avec comité de lectureThe friction of concrete on the interior skin of formworks takes place during the pouring of concrete into the molds. The present work investigates the friction of a granular material (i.e. fresh concrete) against metallic ...