Nos laboratoires: Soumissions récentes
Voici les éléments 3382-3388 de 6450
-
Article dans une revue avec comité de lecture; ; ; ;
COLIN, Xavier; RICHAUD, Emmanuel (Elsevier, 2010)
Thin (60 μm) and thick (250 μm) samples of poly(ether ether ketone) were subjected to radiochemical ageing at 24 kGy h -1 dose rate for doses up to 30.7 MGy at 60 °C in air. FTIR spectrophotometry (hydroxyl and carbonyl ... -
Article dans une revue avec comité de lecture; ;BRAHAM, Chedly (Springer Verlag/ASM International, 2010)
An experimental design method was used to determine the effect of factors that significantly affect the response of the double loop-electrochemical potentiokinetic reactivation (DL-EPR) test in controlling the susceptibility ...
-
Article dans une revue avec comité de lecture; ; ; ; ; ;EL MANSORI, Mohamed (Elsevier, 2018)
In this research, Al-Fe-Cr quasicrystal (QC) reinforced Al-based metal matrix composites were in-situ manufactured by using selective laser melting (SLM) from the powder mixture. The parametrical optimization based on our ...
-
Article dans une revue avec comité de lectureAYED, Yessine; GERMAIN, Guénaël (Springer Verlag, 2018)
The main objective of this study is to investigate uncoated tungsten carbide tool wear mechanisms for high-pressure waterjet machining of the Ti555-3 titanium alloy. A comparative study has been undertaken (i.e. conventional ...
-
Article dans une revue avec comité de lectureMOREL, Franck; ; SAINTIER, Nicolas (Università di Cassino, 2015)
This study aims at providing a better understanding of the effects of both microstructure and defect on the high cycle fatigue behavior of metallic alloys using finite element simulations of polycrystalline aggregates. It ...
-
Article dans une revue avec comité de lectureAYED, Yessine; GERMAIN, Guénaël; ; ; (Springer Verlag, 2017)
Cryogenic-assisted machining has already shown its advantages on the process and the machining parameters have been analysed. However, part of the coolant jet characteristics as the pressure and flow rate have not been ...
-
Communication avec acte; ; ; ;GIRAUD-AUDINE, Christophe (IEEE, 2017)
The multimodal control of a 2D controlled-Friction Device is presented. We use the Vector control method because the phase and amplitude of two vibration modes at a same frequency can be precisely set. The closed loop ...
