Thermomechanical analysis induced by interrupted cutting of Ti6Al4V under several cooling strategies
Article dans une revue avec comité de lecture
Cryogenic machining has mainly investigated in continuous cutting. Therefore, there is a lack of knowledge on the application of this technology to interrupted cutting, such as in milling. This study aims to investigate the thermomechanical phenomena in interrupted cutting of Ti6Al4V alloy under cryogenic, flood cooling and dry conditions. Due to the complexity of the thermomechanical analysis in milling, a special designed experimental setup has been developed through interrupted turning tests. This work highlights the influence of cryogenic flow rate and cutting time/non-cutting ratio on tool temperature. The obtained results can be extrapolated to milling operation.
Showing items related by title, author, creator and subject.
Hybrid experimental/modelling methodology for identifying the convective heat transfer coefficient in cryogenic assisted machining Article dans une revue avec comité de lectureLEQUIEN, Pierre; POULACHON, Gérard; OUTEIRO, José; RECH, Joël (Elsevier, 2018)Cryogenic assisted machining has become a very popular method in the metal cutting industry, as it enables the cooling of a cutting zone for improving surface integrity or/and tool life without contaminating the machined ...
CFD simulation and optimize of LN2 flow inside channels used for cryoge nic machining: application to milling of titani um alloy Ti - 6Al - 4V Communication avec acteTAHRI, Chawki; LEQUIEN, Pierre; OUTEIRO, José; POULACHON, Gérard (ELSEVIER, 2017)Cryogenic machining is seen as a possible solution to increase tool life and improve surface integrity of machined components, by efficiently removing the heat from the cutting zone. Unfortunately, most of the ...
Communication avec acteCHERIF, Iheb; OUTEIRO, José; COTTON, Dominique; POULACHON, Gérard; CHARRONDIERE, Guillaume; BROSSE, Alexandre (Elsevier BV, 2019)Heat exchangers in new nuclear power generation plants are made of thin AISI 316L stainless-steel plates stacked together in order to improve their efficiency and compactness. To ensure the assembly, the global distortion ...
Communication avec actePOULACHON, Gérard; OUTEIRO, José; RAMIREZ, Christophe; ANDRÉ, Victorien; ABRIVARD, Guillaume (Elsevier, 2016)This paper deals with the hole surface quality when CFRP drilling. Mechanical instrumented operations have enabled to follow precisely the damage on the tool margins and the main cutting edges. The amount of uncut fibers ...
Influence of toolpath and clamping strategies on stainless steel plates distorsion after machining Communication sans acteCHARRONDIERE, Guillaume; CHERIF, Iheb; POULACHON, Gérard; COTTON, Dominique; OUTEIRO, José (2018)Heat exchangers in nuclear power generation plants are made of thin stainless-steel plates assembled together in order to improve their efficiency and compactness. To ensure the assembly, the global distortion of those ...