Specific Cutting Forces of Isotropic and Orthotropic Engineered Wood Products by Round Shape Machining
TypeArticles dans des revues avec comité de lecture
The set-up of machining parameters for non-ferric materials such as wood and wood-based materials is not yet defined on a scientific basis. In this paper, a new rapid experimental method to assess the specific cutting coefficients when routing isotropic and orthotropic wood-based materials is presented. The method consists of routing, with different depths of cut, a given material previously machined to a round shape after having it fixed on a dynamometric platform able to measure the cutting forces. The execution of subsequent cuts using different depths of cut allows the calculation of the specific cutting coefficients. With the measurement being done during real routing operations, a method to remove machine vibrations was also developed. The specific cutting coefficients were computed for the whole set of grain orientations for orthotropic materials and as an average for isotropic ones. The aim of this paper is to present and validate the whole method by machining selected materials such as Polytetrafluoroethylene—PTFE (isotropic), Medium Density Fiberboard—MDF (isotropic), beech Laminate Veneer Lumber—LVL (orthotropic) and poplar LVL (orthotropic). The method and the proposed analysis have been shown to work very effectively and could be used for optimization and comparison between materials and processes.
Files in this item
Showing items related by title, author, creator and subject.
MARCON, Bertrand; GOLI, Giacomo; MATSUO-UEDA, MIYUKI; DENAUD, Louis; UMEMURA, Kenji; GRIL, Joseph; KAWAI, Shuichi (SISEF (Italian Society of Silviculture and Forest Ecology), 2018)The kinetics of several poplar (Populus alba L.) wood properties during thermal modification conducted in conventional oven with air recirculation were analysed and modelled in this paper. A wide range of properties was ...
CURTI, Rémi; MARCON, Bertrand; DENAUD, Louis; COLLET, Robert (BioResources, 2018)Proper valorization of the sawing wastes in industrial sawmills is a permanent issue with strong economic and environmental stakes. Most industrial sawmills are equipped with chipper-canter heads reducing the outer part ...
Modelling wooden cultural heritage. The need to consider each artefact as unique as illustrated by the Cannone violin MARCON, Bertrand; GOLI, Giacomo; FIORAVANTI, Marco (Springer Science and Business Media LLC, 2020)This research work investigates the possibility to use a hygroscopic model based on Fick’s law to predict the global moisture content variations an historical violin undergoes during a concert. To set up the model to work ...
Effect of Forestry Management and Veneer Defects Identified by X-ray Analysis on Mechanical Properties of Laminated Veneer Lumber Beams Made of Beech VIGUIER, Joffrey; MARCON, Bertrand; GIRARDON, Stéphane; DENAUD, Louis (NC State University, 2017)This study proposes an innovative model based on local grain angle measurements to predict the modulus of elasticity of LVL made from beech. It includes a veneers sorting method industrially compatible thanks to its low ...
PURBA, Citra Yanto Ciki; VIGUIER, Joffrey; DENAUD, Louis; MARCON, Bertrand (Springer Science, 2020)The wood structure anisotropy and moisture content variation within the volume create different patterns of light scattering inside the wood. The objective of this study was to assess the suitability of a laser method for ...