Stochastic Metamodel for Probability of Detection Estimation of Eddy-Current Testing Problem in Random Geometric
TypeArticles dans des revues avec comité de lecture
The calculation of the Probability Of Detection (POD) in Non Destructive Eddy Current Testing requires the solution of a stochastic model requiring numerous calls of a numerical model leading to a huge computation time. To reduce this computation time, we propose in this paper to combine either the use of a stochastic metamodel and a mapping which avoids the remeshing step. The stochastic metamodel is constructed using the Least Angle Regression Method. This approach is tested on a axisymmetric problem with 6 random input paramters which shows its efficiency and its accuracy.
Showing items related by title, author, creator and subject.
Uncertainty quantification and sensitivity analysis in electrical machines with stochastically varying machine parameters OFFERMANN, Peter; MAC, Hung; NGUYEN, Thu Trang; CLENET, Stéphane; DE GERSEM, Herbert; HAMEYER, Kay (IEEE, 2015)Electrical machines that are produced in mass production suffer from stochastic deviations introduced during the production process. These variations can cause undesired and unanticipated side-effects. Until now, only worst ...
Modelling of piezoelectric actuators used in forging processes: principles and experimental validation NGUYEN, Thanh Hung; GIRAUD-AUDINE, Christophe; LEMAIRE-SEMAIL, Betty; ABBA, Gabriel; BIGOT, Régis (IEEE, 2012)This paper deals with the modelling of a piezo- electric stack actuator used to generate specific low frequency vibration waveforms to assist forging processes. Experimental results show that such waveforms reduce the ...
Progressive wave: a new multisource vibration technique to assist forming processes - kinematic study, simulation results and design proposition KHAN, Armaghan; NGUYEN, Thanh Hung; GIRAUD-AUDINE, Christophe; ABBA, Gabriel; BIGOT, Régis; LEMAIRE-SEMAIL, Betty (2013)Use of vibration in the forming process has already shown numerous advantages in the improvement of mechanical and surface properties of workpiece such as good surface or less friction between die and workpiece. The aim ...
NGUYEN, Thanh Hung; GIRAUD-AUDINE, Christophe; AMBERG, Michel; LEMAIRE-SEMAIL, Betty; ABBA, Gabriel; BIGOT, Régis (IEEE, 2014)This paper presents the design of a mechatronic system integrating iezoelectric multi-actuators, which is used to generate low-frequency vibrations to assist the forging process. With the aim of controlling the complete ...
Modelling of forging processes assisted by piezoelectric actuators : principles and experimental validation GIRAUD-AUDINE, Christophe; NGUYEN, Thanh Hung; LEMAIRE-SEMAIL, Betty; ABBA, Gabriel; BIGOT, Régis (IEEE, 2014)This paper presents the modelling of a forging processes assisted by a piezoelectric actuator (PA), which is used to generate specific low frequency vibration waveforms. Experimental results show that such waveforms reduce ...