Characterization of cyclic behavior, deformation mechanisms, and microstructural evolution of MarBN steels under high temperature conditions
Article dans une revue avec comité de lecture
Auteur
Date
2019Journal
International Journal of FatigueRésumé
In this paper, the low cycle fatigue behaviour of MarBN steels at elevated temperatures is discussed. Four cyclic loading waveforms were applied to investigate both the mechanical and microstructural features. The mechanical results exhibit continuous cyclic softening and decelerated stress relaxation, recoverable viscoelasticity at both short and long time scales and irrecoverable viscoplastic mechanisms. Detailed microstructural characterisation was also conducted to investigate the rupture behaviour of the investigated steel. The microstructural findings indicate typical transgranular and ductile fracture behaviour, extensive sub-grain formation and structural refinement as well as significant decrease in hardness close to the fracture surface.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureFully reversed strain controlled low cycle fatigue and creep-fatigue interaction tests have been performed at ±0.7% strain amplitude and at three different temperatures (400°C, 500°C and 600°C) to investigate the cyclic ...
-
Article dans une revue avec comité de lectureIn order to better understand the physical process of deformation and cyclic softening a 12% Cr martensitic stainless steel FV566 has been cyclically tested at high temperature in strain control. Increase in temperature ...
-
Article dans une revue avec comité de lectureBAO, Jianguang; BAO, Siyuan; GUO, Xiaofeng; WANG, Yonghong; SUN, Wei; BENAARBIA, Adil (Elsevier, 2020)This paper presents experimental and numerical investigations to study spatial-temporal distributions of strain heterogeneities within a FV566 turbine rotor steel subjected to high temperature conditions. Strain field were ...
-
Article dans une revue avec comité de lectureBAO, Jianguang; WU, Zhengkai; WU, Shengchuan; WITHERS, Philip J.; LI, Fei; AHMED, Saad; SUN, Wei; BENAARBIA, Adil (Elsevier BV, 2021)This paper presents the results of high temperature strain-range controlled low cycle fatigue tests of a laser powder bead fused AlSi10Mg alloy. Following stress relief (2hrs at 300 ℃), two cyclic loading waveforms (standard ...
-
Article dans une revue avec comité de lectureGUO, X.F.; SUN, W.; BECKER, A.; MORRIS, A.; PAVIER, M.; FLEWITT, P.; TIERNEY, M.; WALES, C.; BENAARBIA, Adil (Elsevier, 2020)Improving the energy efficiency of power plants by increasing steam operating temperature up to 700 °C can be achieved using novel engineering design concepts such as coated steam pipe systems. This paper presents an ...