Study of the dynamic fracture of hollow spheres under compression using the Discrete Element Method
Article dans une revue avec comité de lecture
JournalProcedia Structural Integrity
Hollow sphere structure (HSS) belongs to cellular solids that have been studied recently for its multiples properties. In our case, HSS aims to absorb soft impacts energy on an airliner cockpit. This structure is investigated because of its promises in term of specific energy dissipated (J.kg1) during impact. First of all, quasi- static and dynamic (v = 5mmmin_1 to v = 2ms4) uniaxial compression tests are conducted at room temperature on a single sphere (D = 30 mm). Rapid crack propagation (RCP) is observed to be predominant at macroscopic scale. The formalism of Linear Elastic Fracture Mechanics (L.E.F.M.) is therefore used to estimate the dynamic energy release rate GIdc . The crack tip location is measured during the crack propagation using a high speed camera. The Discrete Element Method (DEM) is used to simulate the dynamic fracture by implementing a node release technique to perform a generation phase simulation. The dynamic energy release rate can be determined using the experimentally measured crack history. In hollowed spherical structures the numerical results reveal a high proportion of energy dissipated through inertial effects as well as a dependence of the thickness of the skin over the range of 0.04 mm to 1.2 mm. At a crack tip velocity of 0.6 times the Rayleigh wave speed of the material, the dynamic correction factor is less than 0.05. Similar results have been shown for the longitudinal dynamic fracture of polymer pipes. The quantitative results of GIdc are in good agreement with the literature and the present model offers an alternative to the finite element method to simulate the rapid crack propagation.Its use reveals to be an interesting way to model the mechanical behavior of brittle materials.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Article dans une revue avec comité de lectureLE BARBENCHON, Louise; GIRARDOT, Jérémie; KOPP, Jean-Benoit; VIOT, Philippe (Elsevier, 2019)This study focuses on the microstructural aspects of a cork-based by-product known as agglomerated cork and its influence on the compressive mechanical behaviour. The material consists in granulates of a natural polymeric ...
Reinforcement of cellular materials with short fibres: Application to a bio-based cork multi-scale foam Article dans une revue avec comité de lectureLE BARBENCHON, Louise; KOPP, Jean-Benoit; GIRARDOT, Jérémie; VIOT, Philippe (Elsevier, 2020)A bio-sourced foam, agglomerated cork, was chosen to evaluate the influence of short fibres on the mechanical behaviour of cellular materials. The final material was obtained by mixing cork particles with a thermoset resin. ...
Experimental Investigation and Discrete Element Modelling of Composite Hollow Spheres Subjected to Dynamic Fracture Article dans une revue avec comité de lectureCORE, Arthur; KOPP, Jean-Benoit; VIOT, Philippe; CHARLES, Jean-Luc; DAU, Frédéric (Hindawi Publishing Corporation, 2017)This paper deals with the characterization and the numerical modelling of the collapse of composite hollow spherical structures developed to absorb energy during high velocity impacts. The structure is composed of hollow ...
Article dans une revue avec comité de lectureLE BARBENCHON, Louise; VIOT, Philippe; GIRARDOT, Jérémie; KOPP, Jean Benoit (Springer, 2021)Understanding the mechanical behavior of materials in working conditions is a current problem in transport industries. In this article, we demonstrate why the temperature and the strain-rate are first-order parameters when ...
Article dans une revue avec comité de lectureKOPP, Jean-Benoit; GIRARDOT, Jérémie (Scientific Research Publishing, Inc., 2021)The influence of temperature on the resistance to rapid crack propagation of a semi-crystalline bio-based polymer was studied. The experimental results described in this study allow to initiate a first discussion ...