Measurement of fiber orientation by laser light scattering on dry and rough sawn green hardwoods
Communication avec acte
Scanner measurements allow knot detection and machine strength grading on sawn timber, which answers the construction and sawmilling industry needs at high production rates. In particular, laser scanners measure fiber orientation by means of the so-called tracheid effect on wood surface where elliptically scattered laser light can be observed. Many studies showed that a red laser scanner is very effective on softwood species like spruce but ineffective on many hardwood species like oak. However, the LaBoMaP has recently developed a fiber orientation scanner, utilizing another kind of laser, effective on hardwood species, especially oak. Other studies showed that measurement quality is better on sanded and planed wood than on rough sawn timber. Besides, the influence of moisture content on tracheid effect is also known. In practice, light ellipses are biggest on fresh wood than on dry wood. In the present work, a method is proposed to measure the intensity of tracheid effect on fresh sawn hardwoods, according to the species, and the error of the fiber orientation measurement is also assessed. To achieve this, clean fresh wood test pieces were first scanned at 0° orientation and ellipse geometrical parameters were compared to that obtained on an isotropic surface. In a second time, test pieces were scanned at different orientations from 0° to 90°. Measurement error was defined as the difference of scanned fiber angle mean on each iteration and test piece orientation between these same iterations. Comparisons of results between species and moisture content will be presented at the conference.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Influence of wood anatomy on fiber orientation measurement obtained by laser scanning on five European species Article dans une revue avec comité de lectureAbstract In order to obtain high production rates of sawn timber, the sawmilling industry can use laser scanning, allowing knot detection and machine strength grading. In particular, laser scanners measure grain angle using ...
Assessment of the error of fiber orientation measurement obtained by laser scanning on several European hardwood and softwood species Communication avec acteScanner measurements allow knot detection and machine strength grading on sawn timber. In particular, laser scanners measure fiber orientation by means of the so-called tracheid effect explained by the fact that the wood ...
Modélisation des déformations au séchage d’avivés de chêne à partir de la mesure de l’orientation des fibres Communication avec acte-
Traceability and quality assessment of Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) logs: the TreeTrace_Douglas database Article dans une revue avec comité de lectureLONGUETAUD, Fleur; POT, Guillaume; MOTHE, Frédéric; BARTHELEMY, Alexis; DECELLE, Rémi; DELCONTE, Florian; GE, Xihe; GUILLAUME, Grégoire; MANCINI, Théo; RAVOAJANAHARY, Tojo; BUTAUD, Jean-Claude; COLLET, Robert; DEBLED-RENNESSON, Isabelle; MARCON, Bertrand; NGO, Phuc; ROUX, Benjamin; VIGUIER, Joffrey (Springer Science and Business Media LLC, 2022-11-28)The TreeTrace_Douglas database includes images and measurements at several stages of the processing of Douglas fir logs, from sawmill logyard to machine grading and destructive testing of boards, and is suitable for research ...
Communication avec actePENVERN, Hélène; POT, Guillaume; VIGUIER, Joffrey; COLLET, Robert; DEMOULIN, Leyne; ROUX, Benjamin; OLSSON, Anders; HU, Min (2023-09-05)This work is exhibiting a new laboratory investigation method to obtain fibre 3D angle measurement of a wood piece after successive planing of the whole specimen. By combining in-plane fibre measurements through laser ...