Plastic Strain Threshold Determination for White Layer Formation in Hard Turning of AISI 52100 Steel Using Micro-Grid Technique and Finite Element Simulations
TypeArticles dans des revues avec comité de lecture
White layer (WL) formation in metal cutting is generally found to have negative effects on the corrosion and fatigue life of machined components. Nowadays, the mechanism of the WL formation has not been understood very well, especially about the contribution of the thermal and mechanical loadings generated by the cutting process on WL formation. The relationship between subsurface plastic strain caused by mechanical loadings and the formation of WLs is of our concern. To address this issue, WL formation in hard turning of AISI 52100 under dry and cryogenic cooling conditions is investigated by subsurface plastic strain measurement using the micro-grid technique, observed by scanning electron microscope (SEM). Due to the considerable low temperature, WL is mainly generated by the mechanical effect rather than the thermal one, and this hypothesis is supported by physically based finite element method (FEM) simulations. From the investigations, we discover the existing plastic strain threshold, which governs the occurrence of WL in hard turning of AISI 52100 steel under cryogenic cooling conditions.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process ZHANG, Xiao-Ming; ZHANG, Ke; ZHANG, Dong; OUTEIRO, José; DING, Han (ASME International, 2019)A great challenge of metal cutting modeling is the ability of the material constitutive model to describe the mechanical behavior of the work material under the deformation conditions that characterizes this process. In ...
Residual Stresses in Machining of AISI 52100 Steel under Dry and Cryogenic Conditions: A Brief Summary CARUSO, Serafino; OUTEIRO, José; UMBRELLO, Domenico; BATISTA, Antonio (Trans Tech Publications, 2014)Residual stress is one of the most important surface integrity parameter that can significantly affect the service performance of a mechanical component, such as: contact fatigue, corrosion resistance and part distortion. ...
Evaluation of present numerical models for predicting metal cutting performance ans residual stresses OUTEIRO, José; UMBRELLO, Domenico; M'SAOUBI, Rachid; JAWAHIR, I.S. (Taylor & Francis, 2015)Efforts on numerical modeling and simulation of metal cutting operations continue to increase due to the growing need for predicting the machining performance. A significant number of numer- ical methods, especially the ...
On the selection of Johnson-Cook constitutive model parameters for Ti-6Al-4V using three types of numerical models of orthogonal cutting ZHANG, Yancheng; OUTEIRO, José; MABROUKI, Tarek (Elsevier, 2015)Johnson-Cook constitutive model is still the most used model in metal cutting simulation, although several drawbacks reported in the literature. A high number of Johnson-Cook model parameters can be found in the literature ...
Simulation of Grain Refinement Induced by High-Speed Machining of OFHC Copper Using Cellular Automata Method ZHANG, Jun; XU, Xiang; OUTEIRO, José; LIU, Hongguang; ZHAO, Wanhua (American Society of Mechanical Engineers, 2020)During high-speed machining (HSM), the microstructure of materials evolves with significant plastic deformation process under high strain rate and high temperature, which affects chip formation and material fracture ...