Nanorheology with a Conventional Rheometer: Probing the Interfacial Properties in Compatibilized Multinanolayer Polymer Films
Article dans une revue avec comité de lecture
Author
BEUGUEL, QuentinGUINAULT, AlainLÉGER, LilianeRESTAGNO, FrédéricSOLLOGOUB, CyrilleMIQUELARD-GARNIER, GuillaumeAbstract
Measuring the viscoelastic behavior of polymers in the vicinity of a surface or under confinement is an experimental challenge. Simple rheological tests of nanolayered films of polyethylene/polyamide 6 compatibilized in situ during the coextrusion process enabled the probing of these interfacial properties. Taking advantage of the different melting points and of the multiplication of the number of interfaces, a drastic increase of dynamic moduli was reported when increasing the interphase volume fraction in the films. A solid-like behavior for the interphase was identified. The complex viscosity of nanolayered films as a function of angular frequency was quantitatively captured for all samples using a weighted mixing law of bulk and interphase viscosities, without additional adjusting parameters, highlighting the interfacial synergy developed in nanolayered polymer films.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture(MDPI, 2021)The barrier performance and structural lightening of organic materials are increasingly desired and constitute a major challenge for manufacturers, particularly for transport and packaging. A promising technique which tends ...
-
Article dans une revue avec comité de lecture; ; ; ; ; ;
REGNIER, Gilles (Elsevier, 2013)
A potential advantage of platelet-like nanofillers as nanocomposite reinforcements is the possibility of achieving two-dimensional stiffening through planar orientation of the platelets. The ability to achieve improved ... -
Article dans une revue avec comité de lecture(Wiley-VCH Verlag, 2013)Blending poly(lactic acid) (PLA) with a small amount of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV; 10 wt%) using a custom multilayer co-extrusion process increases both ductility and gas barrier properties of ...
-
Article dans une revue avec comité de lecture(Elsevier, 2013)Multilayer coextrusion was used to disperse Carbon Nanotubes (CNT) in polypropylene (PP). The dilution of commercially available masterbatches using a twin-screw extruder was first applied to produce several formulations, ...
-
Article dans une revue avec comité de lecture; ; ; ; ;FAYOLLE, Bruno (Elsevier, 2014)
The thermo-oxidative degradation of polylactide (PLA) films was studied between 70 and 150 C. It was shown that the oxidative degradation of PLA leads to a random chain cission responsible for a reduction of the molar ...