Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM): Soumissions récentes

Voici les éléments 589-595 de 1328

    • Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy 
      Article dans une revue avec comité de lecture
      NEAG, Adriana; POP, Mariana S.; ccFAVIER, Véronique (Elsevier, 2012)
      The microstructure and flow behaviour during thixo backward extrusion of 7075 aluminium alloy were investigated. Reheating the steel die and the aluminium billet placed into the die at the same time using an induction ...
    • Curing of urethane dimetracrylate composites: A glass transition study 
      Article dans une revue avec comité de lecture
      NGUYEN, Jean-François; POMES, Benjamin; SADOUN, Michaël; ccRICHAUD, Emmanuel (Elsevier, 2019)
      Urethane dimethacrylate thermosets (UDMA) and their composites (PICN) were cured under varying polymerization pressures (1–3500 bars) and the resulting materials were characterized mainly by dynamic mechanical analysis ...
    • Microstructural and Mechanical Characterization of the Yb: YAG Laser Welding of High-Pressure Die-Casting Mg-Al-Mn Magnesium Alloy 
      Article dans une revue avec comité de lecture
      OUALLAM, Seddik; PEYRE, Patrice; DJEGHLAL, Lamine; GUITTONNEAU, Fabrice; BOUTAGHOU, Zoheir; KABA, Liamine; ccMASSE, Jean-Eric (Trans Tech Publications, 2020)
      In this work, the Yb:YAG laser beam welding of the magnesium alloy AM60 was studied. A laser power of 2 kW and a welding speed of 3.5 m / min give a different welding quality than that obtained by CO2 laser with the same ...
    • In vitro study of drug release from various loaded polyurethane samples and subjected to different non-pulsed flow rates 
      Article dans une revue avec comité de lecture
      ABBASNEZHAD, Navideh; ccSHIRINBAYAN, Mohammadali; ccTCHARKHTCHI, Abbas; ccBAKIR, Farid (Elsevier, 2020)
      Drug-eluting implants with a polymeric matrix are currently widely used and the interest of modeling their behavior is increasing. This article aims to present preliminary results of an in vitro under steady flow, study ...
    • Multiscale study and kinetic modeling of PDCPD thermal oxidation 
      Chapitre d'ouvrage scientifique
      HUANG, Jing; LE GAC, Pierre-Yves; DAVID, Adelina; DROZDZAK, Renata; GILLES, Recher; ccRICHAUD, Emmanuel (Elsevier, 2020)
      Polydicyclopentadiene (PDCPD) is a thermoset polymer synthetized from Ring Opening Metathesis Polymerization and produced by Reaction Injection Moulding process. Due to its interesting properties, like short processing ...
    • Nano- and Micromechanics of Crystalline Polymers 
      Chapitre d'ouvrage scientifique
      GALESKI, Andrzej; ccREGNIER, Gilles (Hanser Fachbuchverlag, 2009)
      It is currently thought that crystalline polymers consists of lamellar crystals which are separated from each other by a layer of amorphous polymer and are held together by tie molecules through the amorphous phase [e.g. ...
    • Beam size dependency of a laser-induced plasma in confined regime: Shortening of the plasma release. Influence on pressure and thermal loading 
      Article dans une revue avec comité de lecture
      RONDEPIERRE, Alexandre; ÜNALDI, Selen; ROUCHAUSSE, Yann; VIDEAU, Laurent; FABBRO, Rémy; CASAGRANDE, Olivier; SIMON-BOISSON, Christophe; BESAUCÉLE, Hervé; CASTELNAU, Olivier; BERTHE, Laurent (Elsevier, 2021)
      Processes using laser-shock applications, such as Laser Shock Peening or Laser Stripping require a deep understanding of both mechanical and thermal loading applied. We hereby present new experimental measurements of the ...