Multiscale damage analysis of the tension‐tension fatigue behavior of a low‐density sheet molding compound
Article dans une revue avec comité de lecture
Date
2021Journal
Journal of Applied Polymer ScienceAbstract
This article presents the experimental findings of tension-tension stress-controlled fatigue tests performed on low-density sheet molding compound (LD-SMC). LD-SMC composite is a type of SMC including a polyester resin reinforced with chopped glass fibers bundles and hollow glass spheres. The coupled frequency-amplitude affects the nature of the overall fatigue response, which can be controlled by the damage mechanisms accumulation and/or by the self-heating. In fact, the self-heating produced a material softening and decreased the fatigue lifetime. For fatigue loading at 80 Hz, self-heating has been observed and yielded to a temperature rise to 65°C, which is more than a glass transition temperature of polyester. Thus, the polyester matrix is subjected to remarkable thermally activated modifications of its physical state. Multiscale damage analysis of the randomly-oriented sample in fatigue showed that the first observed damage phenomenon corresponds to the debonding of the hollow glass microspheres occurring in the fiber depleted zones.
Files in this item
- Name:
- PIMM_JAPS_2021_ SHIRINBAYAN.pdf
- Size:
- 3.528Mb
- Format:
- Description:
- Article
- Embargoed until:
- 2021-07-01
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureZUO, Peiyuan; BENEVIDES, Rodrigo C.; LARIBI, Mohamed-Amine; FITOUSSI, Joseph; SHIRINBAYAN, Mohammadali; BAKIR, Farid; TCHARKHTCHI, Abbas (Elsevier, 2018)In this paper, two kinds of PPS/GF composite samples (PPS-0°, PPS-90°) were prepared with two different fiber main orientations related to the injection direction. A wide range of their properties were discussed. Using ...
-
Article dans une revue avec comité de lectureHAMIDI, A; KHELLADI, Sofiane; ILLOUL, Lounès; SHIRINBAYAN, Mohammadali; BAKIR, Farid; TCHARKHTCHI, Abbas (ELSEVIER, 2015)Reactive Rotational Moulding (RRM) is the best process for producing large hollow plastic parts without weld lines. Constant quality in technical parts requires the process to be mastered by controlling on-line the main ...
-
High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; FITOUSSI, Joseph; MERAGHNI, Fodil; SUROWIEC, Benjamin; BOCQUET, Michel; TCHARKHTCHI, Abbas (Elsevier, 2015)Advanced Sheet Molding Compound (A-SMC) is a serious composite material candidate for structural automotive parts. It has a thermoset matrix and consists of high weight content of glass fibers (50% in mass) compared to ...
-
Article dans une revue avec comité de lectureZUO, Peiyuan; FITOUSSI, Joseph; SHIRINBAYAN, Mohammadali; BAKIR, Farid; TCHARKHTCHI, Abbas (Wiley-Blackwell, 2019)In this article, the overall mechanical properties of a short glass fiber-reinforced polyphenylene sulfide (PPS) composite were tested after oxidation at different temperatures (140, 160, 180, and 200°C), with a maximum ...
-
Article dans une revue avec comité de lectureLUCAS, Albert; DANLOS, Amélie; SHIRINBAYAN, Mohammadali; MOTAHARINEJAD, Vajihe; PARIDAENS, Richard; BENFRIHA, Khaled; BAKIR, Farid; TCHARKHTCHI, Abbas (Springer Verlag, 2019)n this work, the rotational molding process is developed to manufacture in one piece an axial-flow turbomachine rotor with hollow blades. Giving to our knowledge, this process has never been employed in the making of these ...