Influence of laser powder bed fusion process conditions and resulting microstructures on the electromagnetic properties of a 16MnCr5 steel
Article dans une revue avec comité de lecture
Author

13338 Laboratoire d’Électrotechnique et d’Électronique de Puissance - ULR 2697 [L2EP]

13338 Laboratoire d’Électrotechnique et d’Électronique de Puissance - ULR 2697 [L2EP]
Date
2021Journal
Additive ManufacturingAbstract
16MnCr5 steel parts were additively manufactured by laser powder bed fusion in order to investigate the effect of microstructure on electromagnetic properties. As process parameters have a direct impact on the obtained microstructure, different conditions were used to manufacture samples on which magnetic and electrical tests were conducted. The obtained results were presented and discussed in terms of density, microstructure and electromagnetic properties. Finally, correlations have been demonstrated between the microstructure and the electromagnetic performances. Lower magnetic and electric properties were obtained with the higher porosity rates at low volume energy density. The microstructural effects were evidenced, through a decrease in magnetic properties with grain orientation, and an improvement with stress relief annealing.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureTOTO JAMIL, Meryeme; BENABOU, Abdelkader; CLÉNET, Stéphane; SHIHAB, Sylvain; LE BELLU ARBENZ, Laure; MIPO, Jean-Claude (Elsevier, 2020)During the operation of Claw Pole (CP) machines, and for some operating loads, the magnetic core temperature can reach 180°C in some hot spots. As a consequence, the core electromagnetic properties may considerably change, ...
-
Article dans une revue avec comité de lectureTOTO JAMIL, Meryeme; BENABOU, Abdelkader; CLÉNET, Stéphane; SHIHAB, Sylvain; LE BELLU ARBENZ, Laure; MIPO, Jean-Claude (Elsevier, 2021)In this paper, the magnetic ageing of a bulk forged non-annealed magnetic core, used in claw pole synchronous machine, is investigated. The study is carried out by characterizing the material properties of two groups of ...
-
Advances in pantographic structures: design, manufacturing, models, experiments and image analyses Article dans une revue avec comité de lectureDELL’ISOLA, Francesco; SEPPECHER, Pierre; SPAGNUOLO, Mario; BARCHIESI, Emilio; HILD, François; LEKSZYCKI, Tomasz; GIORGIO, Ivan; PLACIDI, Luca; ANDREAUS, Ugo; CUOMO, Massimo; EUGSTER, Simon R.; PFAFF, Aron; HOSCHKE, Klaus; LANGKEMPER, Ralph; TURCO, Emilio; SARIKAYA, Rizacan; MISRA, Aviral; DE ANGELO, Michele; D’ANNIBALE, Francesco; BOUTERF, Amine; PINELLI, Xavier; MISRA, Anil; DESMORAT, Boris; PAWLIKOWSKI, Marek; DUPUY, Corinne; SCERRATO, Daria; PEYRE, Patrice; LAUDATO, Marco; MANZARI, Luca; GÖRANSSON, Peter; HESCH, Christian; HESCH, Sofia; FRANCIOSI, Patrick; DIRRENBERGER, Justin; MAURIN, Florian; VANGELATOS, Zacharias; GRIGOROPOULOS, Costas; MELISSINAKI, Vasileia; FARSARI, Maria; MULLER, Wolfgang; ABALI, Bilen Emek; LIEBOLD, Christian; GANZOSCH, Gregor; HARRISON, Philip; DROBNICKI, Rafał; IGUMNOV, Leonid; ALZAHRANI, Faris; HAYAT, Tasawar (Springer Verlag, 2019)In the last decade, the exotic properties of pantographic metamaterials have been investigated and different mathematical models (both discrete or continuous) have been introduced. In a previous publication, a large part ...
-
Article dans une revue avec comité de lectureFRANÇOIS, Mathieu; HAN, Sangil; SEGONDS, Frédéric; DUPUY, Corinne; RIVETTE, Mickaël; TURPAULT, Simon; MIMOUNA, Mehdi; SALVATORE, Ferdinando; RECH, Joël; PEYRE, Patrice (Informa UK Limited, 2021)Metal additive manufacturing processes, such as laser beam melting (LBM), can play a key role in developing antenna-feed chains because monolithic and multifunctional parts can be manufactured with high geometric freedom ...
-
Article dans une revue avec comité de lectureDELL'ISOLA, Francesco; GIORGIO, Ivan; PLACIDI, Luca; SPAGNUOLO, Mario; PEYRE, Patrice; DUPUY, Corinne; DIRRENBERGER, Justin; PAWLIKOWSKI, M; IGUMNOV, Leonid A. (Institute of Problems of Mechanical Engineering, 2019)The purpose of this article is to show the basic characteristics of the so-called pantographic metamaterial. Here we underline how the microstructure provides some exotic properties and, in principle, implies the second ...