Characterizing tribological behavior of fresh concrete against formwork surfaces
Article dans une revue avec comité de lecture
Résumé
The friction of concrete on the interior skin of formworks takes place during the pouring of concrete into the molds. The present work investigates the friction of a granular material (i.e. fresh concrete) against metallic and polymeric surfaces. Interfacial behavior between different formulated concretes and formwork skins is characterized using a plane-plane tribometer dedicated to concrete tribometer. The formwork surface is measured before and after testing to quantify the wear issue. A Coulomb friction law is observed within the range of tested normal pressures. Tribological tests reveal that friction mechanisms depend on the interface properties. Two underlying mechanisms are hypothesized to explain the wearing of the formwork skin: a granulate-formwork solid-solid friction and a capillary-dominated friction.
Fichier(s) constituant cette publication
- Nom:
- M2P_Construction and Building ...
- Taille:
- 1.877Mo
- Format:
- Description:
- M2P_Construction and Building ...
- Fin d'embargo:
- 2022-03-01
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureSPITZ, N.; MEZGHANI, Sabeur; EL MANSORI, Mohamed; CONIGLIO, Nicolas; MONTAGNE, Alex (Elsevier, 2018)Nowadays buildings construction is performed by pouring concrete into molds called formworks that are usually prefabricated metallic modules. Defects such as stripping may possibly form during the removal of the formwork ...
-
Article dans une revue avec comité de lectureSPITZ, N.; MEZGHANI, Sabeur; EL MANSORI, Mohamed; CONIGLIO, Nicolas; MONTAGNE, Alex (Elsevier, 2018)The sticking of the concrete on metallic formworks during building construction generates many concrete wall defects. Several solutions have been proposed, among which surface lubrication and polymeric coatings are commonly ...
-
Article dans une revue avec comité de lectureConcrete, a commonly used material in the construction industry, interacts with metallic surfaces such as formwork during pouring and reinforced bar during lifespan. Formworks are designed to minimize hardened concrete ...
-
Article dans une revue avec comité de lectureIn this work, the nano-wear-induced behavior of selective laser melting (SLM) processed commercial pure titanium was investigated under several applied loads from 1 mN to 100 mN. The dense (over 99%) commercial pure titanium ...
-
Article dans une revue avec comité de lectureThe development of sand mold three-dimensional printing technologies enables the manufacturing of molds without the use of a physical model. However, the effects of the three-dimensional printing process parameters on the ...