Identification of constitutive equations at very high strain rates using shock wave produced by laser
Article dans une revue avec comité de lecture
JournalEuropean Journal of Mechanics, A/Solids
A method coupling experiments and simulations, is developed to characterize the yield stress and strain hardening of several metals loaded at 10⁶ s−ⁱ and < 25 ns, typically involved during Laser Shock Peening. It was applied to four materials: pure aluminum, 2024-T3 and 7175-T7351 aluminum alloys and Ti6Al4V-ELI titanium alloy. Thin foils have been irradiated with high-power laser to induce high-pressure shock wave. Plastic deformation is activated through the thickness up to the rear free-surface of the foils. These experiments have been simulated using three material constitutive equations: Elastic–Perfectly Plastic model considering static yield stress, Johnson–Cook model without strain hardening and Johnson–Cook model with strain hardening. The material parameters of Johnson–Cook law were identified by comparison of the experimental and calculated velocity profiles of the rear-free surface. Results are shown and discussed.
Files in this item
- Embargoed until:
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lectureLE BRAS, Corentin; RONDEPIERRE, Alexandre; SEDDIK, Raoudha; SCIUS-BERTRAND, Marine; ROUCHAUSSE, Yann; VIDEAU, Laurent; FAYOLLE, Bruno; GERVAIS, Matthieu; MORIN, Leo; VALADON, Stéphane; ECAULT, Romain; FURFARI, Domenico; BERTHE, Laurent (MDPI, 2019)This paper presents the first extensive study of the performances of solid polymers used as confinement materials for laser shock applications such as laser shock peening (LSP) as opposed to the exclusively used water-confined ...
Reconstruction of heterogeneous surface residual-stresses in metallic materials from X-ray diffraction measurements Article dans une revue avec comité de lectureMORIN, Léo; BRAHAM, Chedly; TAJDARY, Pouya; SEDDIK, Raoudha; GONZALEZ, Gonzalo (Elsevier BV, 2021)The aim of this paper is to provide spatially resolved distributions of residual stresses. X-ray diffraction measurements provide an intrinsic average of the residual stress due to the diffracted volume analyzed during the ...
Chapitre d'ouvrage scientifiqueDOQUET, Véronique; HENAFF, Gilbert; PALIN-LUC, Thierry; RISBET, Marion (Elsevier, 2019)The resistance of metal alloys to fatigue can be classified into four major regimes: low-cycle fatigue (or short life), limited resistance (between 10^5 and 10^6 cycles), high-cycle fatigue (between 10^6 and 10^7 cycles) ...
Internal fatigue crack monitoring during ultrasonic fatigue test using temperature measurements and tomography Article dans une revue avec comité de lectureRANC, Nicolas; MESSAGER, Alexandre; JUNET, A.; PALIN-LUC, Thierry; BUFFIÈRE, J.Y.; SAINTIER, Nicolas; ELMAY, Wafa; MANCINI, L.; KING, A.; NADOT, Yves (Elsevier, 2022-09)Very high cycle fatigue fracture is often associated with internal crack propagation and one major problem to study the initiation and the propagation of this internal crack is to detect its initiation and quantify its ...
Effect of mean shear stress on the fatigue strength of notched components under multiaxial stress state Communication avec acteBENNEBACH, Mohamed; PALIN-LUC, Thierry; MESSAGER, Alexandre (Elsevier, 2018)The effect of a static and intermittent shear stress on the HCF strength of two quenched and tempered steel grades used to produce shafts in crane industry was studied on notched specimens (Kt=1.7 and 2.7) for being ...