Mini symposium on cutting and machining: 25 years of ESAFORM activity
Article dans une revue avec comité de lecture
AbstractThis paper reports on the state of the art in the experimental and numerical investigations of cutting and machining processes. The contributions on the above-mentioned processes and published on the Proceedings of the European Scientific Association for material FORMing (ESAFORM) Conferences are highlighted. In particular, this literature review is an update of a previous one conducted in the 2007, after ten years of the ESAFORM activities, and it confirms the crucial role played by the minisymposium on Machining and Cutting in this field. In fact, the research has been quite active even in these last fifteen years, as demonstrated by the number of contributions and their relevant scientific contents. As overall, this review shows as the minisymposium on Machining and Cutting, that has been organized since 2001 with no interruptions, has contributed to the scientific progress on the study of the material removal processes.
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lectureUMBRELLO, Domenico; MATSUMURA, Takashi; ARRAZOLA, Pedro J.; GERMAIN, Guénaël; COURBON, Cédric (Springer Science and Business Media LLC, 2022-04-07)This paper reports on the state of the art in the experimental and numerical investigations of cutting and machining processes. The contributions on the above-mentioned processes and published on the Proceedings of the ...
Surface Integrity When Machining Inconel 718 Using Conventional Lubrication and Carbon Dioxide Coolant Communication avec acteCHAABANI, Sana; ARRAZOLA, Pedro José; AYED, Yessine; MADARIAGA, Aitor; TIDU, Albert; GERMAIN, Guénaël (Elsevier BV, 2020)Surface integrity induced by machining process affects strongly the performance of functional products, for instance, the fatigue life as well as the resistance to stress corrosion cracking. Consequently, it is relevant ...
Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes Article dans une revue avec comité de lectureSELA, Andres; SOLER, Daniel; ORTIZ-DE-ZARATE, Gorka; GERMAIN, Guénaël; DUCOBU, François; ARRAZOLA, Pedro José (MDPI AG, 2021)Despite the prevalence of machining, tools and cutting conditions are often chosen based on empirical databases, which are hard to be made, and they are only valid in the range of conditions tested to develop it. Predictive ...
Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718 Article dans une revue avec comité de lectureCHAABANI, Sana; ARRAZOLA, Pedro José; AYED, Yessine; MADARIAGA, Aitor; TIDU, Albert; GERMAIN, Guénaël (Elsevier, 2020)The most important challenges when machining difficult-to-cut alloys used in critical applications consist mainly in increasing tool life as well as improving the component surface integrity. In particular, the nickel based ...
Tool wear and cutting forces when machining inconel 718 under cryogenic conditions: Liquid nitrogen and carbon dioxide Communication avec acteCHAABANI, Sana; RODRIGUEZ, Iñigo; CUESTA, Mikel; AYED, Yessine; ARRAZOLA, Pedro José; GERMAIN, Guénaël (AIP Publishing, 2019)Nickel-based superalloys are widely exploited in turbojets components which are subjected to intense thermal and mechanical loadings during their operation. In fact, they exhibit excellent mechanical properties over a wide ...