Fatigue strength and life assessment of L-PBF 316L stainless steel showing process and corrosion related defects
Article dans une revue avec comité de lecture
The present work focuses on the modelling of the fatigue behaviour of a 316L produced by laser powder bed fusion containing various defect populations : Lacks of fusion, corrosion pits and one electric discharge machined hemispherical defect. As shown in previous experimental studies, the crack leading up to failure systematically initiated on a single surface defect. The nature and morphology of the critical defect did not show any influence on the fatigue strength, and only its size seemed to matter. To take into account the critical defect size, models based on linear elastic fracture mechanics were implemented and identified. A modified Paris propagation law was used to model the short crack regime. This approach was used to predict S–N curve domains based on critical defects size range.
Files in this item
Showing items related by title, author, creator and subject.
Observations on the influence of process and corrosion related defects on the fatigue strength of 316L stainless steel manufactured by Laser Powder Bed Fusion (L-PBF) Article dans une revue avec comité de lectureMEROT, Pierre; GALLEGOS MAYORGA, Linamaria; PESSARD, Etienne; BUTTIN, Paul; BAFFIE, Thierry; MOREL, Franck (Elsevier BV, 2021-10-06)Corrosive environments are known to be detrimental to the mechanical strength of metallic alloys. In the case of 316L stainless steel, the main corrosion mechanism observed is pitting, which leads to localized rough defects. ...
A flexible modelling framework leading to a pobabilistic multiaxial Kitagawa-Takahashi diagram : applied to cast Al-Si alloys Communication avec acteLE, Viet-Duc; BELLETT, Daniel; MOREL, Franck; SAINTIER, Nicolas; PALIN-LUC, Thierry; PESSARD, Etienne; OSMOND, Pierre (MATEC Web of Conferences, 2014)The aim of this work is to propose simple analytical tools to predict the fatigue strength of cast aluminium components as a function of the casting process and post-cast treatment. The proposed methodology is based on the ...
Article dans une revue avec comité de lectureSELA, Andrés; ORTIZ-DE-ZARATE, Gorka; SOLER, Daniel; GERMAIN, Guénaël; GALLEGOS MAYORGA, Linamaria; ARRAZOLA, Pedro José (Elsevier, 2023-01-12)Nowadays, numerical models are one of the most widely used techniques to predict material performance subjected to different manufacturing processes. However, to obtain accurate predictions, these models require reliable ...
Influence of the microstructure of a Ti5553 titanium alloy on chip morphology and cutting forces during orthogonal cutting Article dans une revue avec comité de lecturePOULIQUEN, Antoine; CHANFREAU, Nicolas; GALLEGOS MAYORGA, Linamaria; MAREAU, Charles; AYED, Yessine; GERMAIN, Guénaël; DEHMAS, Moukrane (Elsevier BV, 2023-07-06)Titanium alloys, largely used for aeronautical applications, are difficult to machine. High cutting forces, chip serration and important tool wear reflect this poor machinability, limiting productivity. One way of improving ...
Communication avec acteLE, Viet Duc; BELLETT, Daniel; PESSARD, Etienne; SAINTIER, Nicolas; OSMOND, Pierre; MOREL, Franck (Elsevier, 2015)This paper describes a microstructural-based high cycle fatigue behaviour model applied to cast Al-Si alloys used in an automobile context. These materials are characterized by the presence of different microstructural ...