Optimal dome design for 700 bar hydrogen tank type IV: Hyperelliptic functions and shape factor
Article dans une revue avec comité de lecture
Auteur
Résumé
The design of 700-bar composite tanks considering the safety factor imposes resistance to a bursting pressure greater than 1645 bars remains difficult which leads to the addition of carbon fibers. On the other hand, the specifications in terms of mass storage capacity and cost require the quantity of this same fiber to be limited. Thus, the optimal sizing of the composite remains one of the major challenges in the development of 700-bar tanks. This study is focused on an optimum design of dome contours for 700 bar hydrogen tank type IV considering the geometrical limitations, winding condition, and the feasible direction. The study is centered on the composite part and is separated into two parts: a study of the manufacturing process (filament winding) in its fundamental aspects and a structural calculation under HyperWorks to check the mechanical strength of the composite layers and optimize their stacking and the number to ensure the holding while minimizing the mass and therefore the cost of the tank.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; ZARBINI SEYDANI, Mohammad; ZIRAK, Nader; FARZANEH, Sedigheh; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (KeAi Publishing, 2021)The masks have always been mentioned as an effective tool against environmental threats. They are considered as protective equipment to preserve the respiratory system against the non-desirable air droplets and aerosols ...
-
Article dans une revue avec comité de lectureThe effect of molecular weight on the crystallization behavior of poly(lactic acid) (PLA) both isothermally and non-isothermally was studied using differential scanning calorimetry and polarized optical microscopy. Two ...
-
Article dans une revue avec comité de lectureFARZANEH, Sedigheh; LUCAS, Albert; BOCQUET, Michel; TCHARKHTCHI, Abbas; FITOUSSI, Joseph (Wiley, 2013)The relationship between shape and properties memory effect, especially viscoelastic properties of polyurethane under study is the main aim of this research work. Tensile tests have been performed in order to introduce ...
-
Article dans une revue avec comité de lectureABDALLAH-ELHIRTSI, Sofiane; EBRAHIMI, Kambiz; SHIRINBAYAN, Mohammadali; FARZANEH, Sedigheh; TCHARKHTCHI, Abbas; FITOUSSI, Joseph (MDPI, 2014)In this study some new concepts regarding certain aspects related to shape memory polymers are presented. A blend of polylactic acid (PLA) (80%) and polybutylene succinate (PBS) (20%) was prepared first by extrusion, then ...
-
Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; ZIRAK, Nader; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas; BAKIR, Farid (Elsevier, 2021)Physical and mechanical properties of the drug-incorporated polymer play a significant role in the release behavior from the drug carriers. Understanding the relative extent of variation in the physical and mechanical ...