Analysis of CO2 Jet’s Temperature by BOS Method for Applications in Cryogenic Machining
Communication avec acte
Date
2023-11-29Abstract
In order to face the challenges in machining difficult-to-cut materials as nickel and titanium alloys, many cooling methods have been developed through the years, among which is the usage of supercritical carbon dioxide (scCO2). By combining the cooling provided by the expansion of the CO2 jet, and the scCO2 solvent properties (for dissolving lubricants), it is possible to reach higher tool life and productivity, with respect to the other classical cooling methods. The purpose of this study is to compare the Background Oriented Schlieren (BOS) method with thermocouple measurements in the context of CO2 jets, whether in liquid or supercritical state. A typical BOS setup using an enlightened background pattern and a high-speed camera was used to determine the temperature of CO2 jets. While the trend of BOS centerline temperature aligns with that of the thermocouple measurements, there exist noticeable disparities between them. These discrepancies average around 20°C in favourable instances and can reach up to 60°C in the most extreme cases. These findings underscore the need to continue the investigation to identify areas for improvement. This pursuit is essential to achieve accurate results for using this method in the development of future temperature models for CO2 jets.
Files in this item
- Name:
- LaBoMaP_MIC_2023_KOULEKPA
- Size:
- 1.611Mb
- Format:
- Description:
- Article de conférence
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureHAMM, Ivan; MARCON, Bertand; ELIAS-BIREMBAUX, Hélène L.; MAURY, Nicolas; VALADON, Stéphane; LABARTHE, Francis; ROSSI, Frederic; POULACHON, Gerard (2021)During machining, most of the thermal sources are resulting from the conversion of mechanical energy during the chip shearing mechanism and the intense frictions between the tool, the chip, and the machined surface. Thermal ...
-
Communication avec acteLIU, Hongguang; CHERIF, Mehdi; CALAMAZ, Madalina; ELIAS-BIREMBAUX, Hélène L.; ROSSI, Frederic; POULACHON, Gerard; AYED, Yessine (Elsevier BV, 2023)This paper presents a novel 3D numerical model of drilling CFRP to evaluate the degradation of mechanical properties in the hole surfaces. It can be used to determine the change of functional performance induced by accumulated ...
-
Article dans une revue avec comité de lectureLAZOGLU, Ismaïl; RAMIREZ, Christophe; AKMAL, Mohammad; MARCON, Bertrand; KREBS, Michael; ROSSI, Frederic; POULACHON, Gerard; MARTINS DO OUTEIRO, Jose Carlos (Elsevier, 2017)Ti-6Al-4V is commonly used especially in aerospace and biomedical industries. This alloy is known as a difficult-to-cut material. Due to its poor thermal properties, the heat generated during machining processes traps near ...
-
Communication avec acteWATIEZ, Noé; MOSKOVKIN, Pavel; LOU, Ruding; OUTEIRO, José; ELIAS-BIREMBAUX, Hélène L.; LUCAS, Stéphane; BESNARD, Aurélien (2022)Glancing Angle Deposition (GLAD) is a technique used in Physical Vapor Deposition (PVD) to prepare thin films with specific properties. During the deposition process, a tilt is introduced between the sputtered atoms flux ...
-
Article dans une revue avec comité de lectureHU, Cheng; MARTINS DO OUTEIRO, Jose Carlos; ZHUANG, Kejia; ELIAS-BIREMBAUX, Hélène L. (Elsevier BV, 2023-12)The Finite-element method (FEM) is often used to simulate the metal machining process. Currently, several formulations are used in metal cutting simulation, such as Lagrangian (LAG), Eulerian (EUL), Arbitrary Lagrangian–Eulerian ...