Numerical Investigation on the Inelastic Instability of Cruciform Columns: Effect of Material and Geometric Parameters
Chapitre d'ouvrage scientifique
Auteur
BELHADJAMOR, Meriem
450279 Laboratoire de Génie Mécanique [Monastir] [LGM / ENIM]
558936 Ecole Nationale d’Ingénieurs de Carthage [ENICARTHAGE]
450279 Laboratoire de Génie Mécanique [Monastir] [LGM / ENIM]
558936 Ecole Nationale d’Ingénieurs de Carthage [ENICARTHAGE]
BEN BETTAIEB, Mohamed
178323 Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux [LEM3]
243747 Labex DAMAS
178323 Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux [LEM3]
243747 Labex DAMAS
Résumé
This work deals with a numerical investigation of the onset of inelastic instability in cruciform columns using the limit-point method. In this aim, a nonlinear buckling analysis was developed to determine the limit-point stress and the structure response during the post-buckling stage. Both total deformation and flow theories are used to describe the mechanical behavior. The numerical simulations were carried out considering cruciform columns with different material and geometric parameters. The obtained results were compared with experimental data from existing literature focused on the influence of the plasticity theory. The influences of the slenderness ratio and material parameters are discussed.
Fichier(s) constituant cette publication
- Nom:
- LEM3_CMSM_2024_BENBETTAIEB.pdf
- Taille:
- 2.090Mo
- Format:
- Fin d'embargo:
- 2025-03-01
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureJEDIDI, Mohamed Yassine; BEN BETTAIEB, Mohamed; KHABOU, Mohamed Taoufik; BOUGUECHA, Anas; HADDAR, Mohamed; ABED-MERAIM, Farid (Elsevier, 2020)In the present contribution, a two-surface plasticity model is coupled with several diffuse and localized necking criteria to predict the ductility limits of hexagonal closed packed sheet metals. The plastic strain is ...
-
An Anisotropic Model with Linear Perturbation Technique to Predict HCP Sheet Metal Ductility Limit Chapitre d'ouvrage scientifiqueJEDIDI, Mohamed Yassine; BEN BETTAIEB, Mohamed; KHABOU, Mohamed Taoufik; BOUGUECHA, Anas; HADDAR, Mohamed; ABED-MERAIM, Farid (Springer International Publishing, 2022)In this paper, hexagonal closed packed (HCP) sheet metal ductility for a viscoplastic material is analyzed by using a linear perturbation technique. It can be used for the analysis of local-ized necking. This technique is ...
-
Chapitre d'ouvrage scientifiqueJEDIDI, Mohamed Yassine; BEN BETTAIEB, Mohamed; BOUGUECHA, Anas; KHABOU, Mohamed Taoufik; HADDAR, Mohamed; ABED-MERAIM, Farid (Springer International Publishing, 2019)In many engineering applications (automotive, computer and mobile device industries, etc.), magnesium alloys have been widely used owing to their interesting physical and mechanical parameters. However, magnesium alloys ...
-
Communication avec acteJEDIDI, Mohamed Yassine; BEN BETTAIEB, Mohamed; KHABOU, Mohamed Taoufik; HADDAR, Mohamed; ABED-MERAIM, Farid (Springer, 2018)Due to their lightness, low stiffness and high strength, Hexagonal Closed Packed (HCP) materials are widely used in aeronautic and aerospace industries. In this paper, the ductility limit of HCP sheet materials at room ...
-
Communication avec acteJEDIDI, Mohamed Yassine; BEN BETTAIEB, Mohamed; BOUGUECHA, Anas; KHABOU, Mohamed Taoufik; HADDAR, Mohamed; ABED-MERAIM, Farid (Springer, 2018)In many engineering applications (automotive, computer and mobile device industries, etc.), magnesium alloys have been widely used owing to their interesting physical and mechanical parameters. However, magnesium alloys ...