Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process
Article dans une revue avec comité de lecture
Abstract
A grade 25 cobalt-based superalloy in the form of a sheet 5 mm in thickness and a steel substrate of type X38CrMoV5 are joined by explosion cladding. The macrostructure and microstructure of the interface and of the co-based superalloy layers are studied. The interface presents the form of wavelets with a period of 1000 µm and an amplitude of 250 µm. The superalloy grains are deformed during the cladding process with several slip systems appearing. Near to the interface, the superalloy grains elongate and tend to follow the geometry of the interface. Observation with a scanning electron microscope (SEM) reveals zones of localised fusion at the interface. The EDS analysis shows that these fusion zones are the result of mixing between the base and cladding plates. Radiocrystallographic analysis by X-ray diffraction reveals the presence of the f.c.c cobalt in the cobalt-based superalloy layer. Thus cobalt retains its crystallographic structure (f.c.c) after cladding process. Hardness is evaluated with reference to microstructure. Near the interface, the hardness of the superalloy is of the order of 600 HV1 kg. In the remainder of the thickness, hardness is of the order of 500 HV1 kg, being greater than that of the unplated superalloy (270 HV1 kg). The track obtained by an indentation test at the interface under a load of 100 kg exhibits no cracking. This tends to prove the good metallurgical bond at the interface.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureThe paper presents the results of an experimental investigation, done on the friction stir welding (FSW) plunging stage. Previous research works showed that the axial force and torque generated during this stage were ...
-
Communication avec acteL’étude présentée concerne la réalisation d’un démonstrateur mettant en évidence le potentiel du procédé de soudage par friction malaxage ( FSW) pour la reconception et la réalisation de pièce en alliages d’aluminium de ...
-
Article dans une revue avec comité de lectureBECKER, Eric; PIERRET, Jean-Christophe; CEZARD, Pierre; FAVIER, Véronique; LANGLOIS, Laurent (Springer Verlag, 2008)Since always, Industry minimizes manufacturing process plan and increases mechanical behaviour. In this topic, the thixoforging process offers important perspectives especially steel thixoforging. It is on the way of ...
-
Article dans une revue avec comité de lectureThe present paper focuses the modelling and the simulation of a direct thixoextrusion test achieved on C38 semi-solid steel. To validate the modelling and the simulation, it is important to get various experimental ...
-
Rapport de rechercheGARNIER, Sébastien; FURET, Benoit; ZIMMER-CHEVRET, Sandra; ABBA, Gabriel; JEMAL, Nejah; LANGLOIS, Laurent (ABBA Gabriel, 2014)Ce rapport contient la définition des pièces d’essais utilisées pour la validation des tâches, d’une part en soudage FSW et d’autre part en usinage, qu’il soit de pièces aluminium ou de pièces en matériaux composites. La ...