Experimental and numerical study of the evolution of stored and dissipated energies in a medium carbon steel under cyclic loading
Article dans une revue avec comité de lecture
To obtain robust estimations of the fatigue limit from energy-based fatigue criteria, constitutive laws must include a correct description of the energy balance when modeling the cyclic behavior. The present paper aims at providing a better understanding of the evolution of the energy balance at both microscopic and macroscopic scales in a medium carbon steel. First, an experimental procedure is used to estimate the amount of energy which is either stored in the material or dissipated into heat at a macroscopic scale. The energy balance is observed to be very dependent on the stress amplitude and the number of loading cycles. A model is then developed to investigate the energy balance at a microscopic scale. From the simulation results, both the stored energy and dissipated energy fields are found to be strongly scattered. The dispersion is mostly explained by the crystallographic orientation distribution and the two-phased microstructure.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Article dans une revue avec comité de lectureHEYRAUD, Hugo; ROBERT, Camille; MAREAU, Charles; BELLETT, Daniel; MOREL, Franck; BELHOMME, Nicolas; DORE, Olivier (Elsevier BV, 2021-02-14)Weld toes and weld roots of continuously welded structures subjected to cyclic loading are critical zones in terms of the fatigue resistance. The finite element method coupled with a fatigue criterion is commonly used to ...
Experimental characterization and numerical modeling of the influence of a proof load on the fatigue resistance of welded structures Article dans une revue avec comité de lectureHEYRAUD, Hugo; MAREAU, Charles; LEFEBVRE, Fabien; AMUZUGA, Philippe; HAUTEVILLE, Robin; MOREL, Franck; JUBIN, Laurent; BELLETT, Daniel; LEBLANC, Théo (Elsevier BV, 2023-03-11)The influence of a proof load, or an initial overload, on the fatigue resistance of welded structures is investigated in this study. Arc welded stiffeners made of S355 steel are considered and fatigue-tested in as-welded ...
Experimental study of the impact of geometrical defects on the high cycle fatigue behavior of polycrystalline aluminium with different grain sizes Article dans une revue avec comité de lectureGeometrical defects are known to have a detrimental influence on the high cycle fatigue resistance of metallic alloys, smaller defects being less harmful. In this experimental work, the influence of the defect size on the ...
Experimental and numerical study of the evolution of stored energy in metallic materials under cyclic loading Communication sans acteIn-service loading conditions usually generate complex cyclic stress states. As such, the choice of an appropriate multiaxial fatigue criterion plays a crucial role in obtaining correct fatigue predictions. In the case of ...
A crystal plasticity based approach for the modelling of high cycle fatigue damage in metallic materials Article dans une revue avec comité de lectureIn this paper, a polycrystalline model is proposed to describe the fatigue behaviour of metallic materials in the high cycle fatigue regime. The model is based on a multiscale approach, which allows the connection of local ...