Experimental characterization of the iron losses variability in stators of electrical machines
TypeArticles dans des revues avec comité de lecture
Manufacturing processes may introduce a significant variability on the magnetic properties of claw pole generator stators. The present work deals with the analysis of two groups of stator samples. The first group is composed of 28 slinky stators (SS) and the second group is composed of 5 stators, manufactured using laser cut stacked laminations (SL). Both groups are made from the same lamination grade and with the same geometrical dimensions. Characterization was carried out for several levels of excitation field at 50Hz. A noticeable variability has been observed on the iron losses for SS samples, whereas it appears to be not significant for SL samples. The loss separation technique has then been investigated for the SS samples. Results show that the variability of static losses is more important than the one of dynamic losses.
Showing items related by title, author, creator and subject.
Characterization of the local Electrical Properties of Electrical Machine Parts with non-Trivial Geometry ARBENZ, Laure; BENABOU, Abdelkader; CLENET, Stéphane; MIPO, Jean-Claude; FAVEROLLE, Pierre (IOS Press, 2015)In electrical machines, knowing the electrical conductivity is of importance for the eddy current calculation, especially when massive iron parts are involved. Generally the conductivity is measured on samples of raw ...
Characterization of the local incremental permeability of a ferromagnetic plate based on a four needles technique ARBENZ, Laure; BENABOU, Abdelkader; CLÉNET, Stéphane; FAVEROLLE, Pierre; MIPO, Jean-Claude (IEEE, 2016)The performances of electrical machines depend highly on the behavior of ferromagnetic materials. In some applications, these materials operate under DC polarization, i.e. when the magnetic field oscillates around a DC ...
Characterization of the Local Incremental Permeability of a Ferromagnetic Plate Based on a Four Needles Technique ARBENZ, Laure; BENABOU, Abdelkader; CLENET, Stéphane; MIPO, Jean-Claude; FAVEROLLE, Pierre (Institute of Electrical and Electronics Engineers (IEEE), 2016)The performances of electrical machines depend highly on the behavior of ferromagnetic materials. In some applications, these materials operate under DC polarization, i.e. when the magnetic field oscillates around a DC ...
BORSENBERGER, Marc; BENABOU, Abdelkader; BAUDOUIN, Cyrille; BIGOT, Régis; FAVEROLLE, Pierre; MIPO, Jean-Claude (IOS Press, 2018)Magnetic parts are usually composed of a stack of electrical steel laminations to reduce the eddy current losses. However, for cost reasons or for specific applications the magnetic core can be made from massive steel and ...
EL BECHARI, Reda; BRISSET, Stéphane; CLENET, Stéphane; MIPO, Jean-Claude (IEEE, 2017)Meta-models proved to be a very efficient strategy for optimization of expensive black-box models, e.g. Finite Element simulation for electromagnetic devices. It enables to reduce the computational burden for optimization ...