Integration of Residual Stresses in the Design of Mechanical Parts
dc.contributor.author
hal.structure.identifier | ELGUEDER, Jawhar
|
dc.contributor.author
hal.structure.identifier | ROUHAUD, Emmanuelle
|
dc.contributor.author | COCHENNEC, Florent |
dc.contributor.author
hal.structure.identifier | ROUCOULES, Lionel
|
dc.date.accessioned | 2013 |
dc.date.available | 2013 |
dc.date.issued | 2011 |
dc.date.submitted | 2013 |
dc.identifier.issn | 0255-5476 |
dc.identifier.uri | http://hdl.handle.net/10985/7277 |
dc.description.abstract | This paper presents an original approach in mechanical design to integrate the manufacturing constraints in the final CAD model. An original user-interface is used to integrate manufacturing constraints (for example tolerances) and consequences (for example roughness or hardening) into the model. One of the important consequences of manufacturing processes is the generation of residual stresses into the part. A specific tool is developed and used as a design tool to manage the global evolution of residual stresses in the mechanical part and to obtain the deformed geometry resulting from the applied manufacturing plan. These results can then be used in fatigue simulation. To support the model, a database is used for the integration of residual stresses from stored experimental results, analytical or numerical calculations. An example of a metal sheet laminated and deformed by shot peening is given, the deformed geometry is rebuilt and compared to the experimental results. |
dc.language.iso | en |
dc.publisher | Trans Tech Publications Inc |
dc.rights | Post-print |
dc.subject | Design for Manufacturing |
dc.subject | Fatigue Design |
dc.subject | Manufacturing Constraint |
dc.subject | residual stress |
dc.subject | manufacturing constraint |
dc.subject | design for manufacturing |
dc.subject | fatigue design |
dc.title | Integration of Residual Stresses in the Design of Mechanical Parts |
dc.identifier.doi | 10.4028/www.scientific.net/MSF.681.255 |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Aix en Provence |
dc.subject.hal | Sciences de l'environnement: Ingénierie de l'environnement |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Matériaux et structures en mécanique |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
ensam.audience | Non spécifiée |
ensam.page | 255-260 |
ensam.journal | Materials Science Forum |
ensam.volume | 681 |
hal.identifier | hal-00857475 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |
dc.identifier.eissn | 1662-9760 |