Improvement of Cutting Forces Modeling Based on Oriented Cutting Tests
TypeCommunications avec actes
In order to predict the characteristics of the machined part, such as geometry, surface roughness and fatigue or corrosion resistance, the cutting forces values should be known as precisely as possible. The edge discretisation methodology can be used to model the three components of the cutting forces. The results are generally considered as suitable, even if the considered cutting operation is complex, because the geometry is well described. Usually, the local cutting forces model is identified from orthogonal or oblique cutting tests and the local contributions are assumed to be independent of the orientation of the elementary edge in the reference plane Pr. However, when turning in the tool nose or with round inserts, the tool cutting edge angle Kr (or Side Cutting Edge Angle) evolves along the active cutting edge and the values of this angle are very small compared to that of 90° used in orthogonal/oblique cutting. For this study, a new elementary cutting operation, called “oriented cutting”, has been tested. In this configuration, the active cutting edge is rectilinear, without inclination, but oriented by an angle Kr different from 90°. In addition, cylindrical turning tests have been done. The measurements, performed in pure copper, show an influence of the tool cutting edge angle on the cutting forces. An interaction between Kr and the workpiece radius is also highlighted.
Files in this item
Showing items related by title, author, creator and subject.
A generalised geometrical model of turning operations for cutting force modelling using edge discretisation CAMPOCASSO, Sébastien; COSTES, Jean-Philippe; FROMENTIN, Guillaume; BISSEY BRETON, Stéphanie; POULACHON, Gérard (Elsevier, 2015)The knowledge of cutting forces is of prime importance to ensure the success of cutting operations, the desired properties of the machined parts and therefore the functionality of the workpieces. Edge discretisation is one ...
Identification d'un modèle d'efforts de coupe mécanistique et application dans le cas d'un contournage de cuivre pur CAMPOCASSO, Sébastien; TRAPET, Florent; COSTES, Jean-Philippe; FROMENTIN, Guillaume; BISSEY BRETON, Stéphanie; POULACHON, Gérard (2012)L'obtention des caractéristiques des pièces usinées ainsi que la bonne maîtrise du procédé d'usinage sont liées aux efforts de coupe. De nombreux modèles d'efforts de coupe ont déjà été développés, mais ils sont souvent ...
CAMPOCASSO, Sébastien; POULACHON, Gérard; COSTES, Jean-Philippe; BISSEY BRETON, Stéphanie (Elsevier, 2014)The cutting forces are often modelled using edge discretisation methodology. In finish turning, due to the smaller corner radii, the use of a local cutting force model identified from orthogonal cutting tests poses a ...
CAMPOCASSO, Sébastien; POULACHON, Gérard; BISSEY BRETON, Stéphanie; COSTES, Jean-Philippe; OUTEIRO, José (ELSEVIER, 2017)Mechanistic cutting force modelling generally involves coefficients identification from machining tests. In order to develop multi-material cutting force models avoiding identification, several studies have tried to link ...
GERMAIN, Dimitri; FROMENTIN, Guillaume; POULACHON, Gérard; BISSEY BRETON, Stéphanie (ELSEVIER, 2013)In this paper, a reviewof work performed in the area of force modelling in metal cutting processes is presented. Past and present trends are described and criticised to compare their relevance with current requirements. ...