Generation and characterization of T40/A5754 interfaces with lasersPatrice
Article dans une revue avec comité de lecture
Laser-induced reactive wetting and brazing of T40 titanium with A5754 aluminum alloy with 1.5 mm thickness was carried out in lap-joint conﬁguration, with or without the use of Al5Si ﬁller wire. A 2.4 mm diameter laser spot was positioned on the aluminum side to provoke spreading and wetting of the lower titanium sheet, with relatively low scanning speeds (0.1–0.6 m/min). Process conditions did not play a very signiﬁcant role on mechanical strengths, which were shown to reach 250–300 N/mm on a large range of laser power and scanning speeds. In all cases considered, the fracture during tensile testing occurred next to the TiAl3 interface, but in the aluminum fusion zone. The interfacial resistance was then evaluated with the LASAT bond strength tester, based upon the generation and propagation of laser-induced shock waves. A 0.68 GPa uniaxial bond strength was estimated for the T40/A5754 interface under dynamic loading conditions.
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lecturePEYRE, Patrice; BERTHE, Laurent; DAL, Morgan; POUZET, Sébastien; SALLAMAND, Pierre; TOMASHCHUK, Iryna (Elsevier, 2014)Laser-induced reactive wetting and brazing of T40 titanium with A5754 aluminum alloy with 1.5 mm thickness was carried out in lap-joint configuration, with or without the use of Al5Si filler wire. A 2.4 mm diameter laser ...
Article dans une revue avec comité de lecturePEYRE, Patrice; DAL, Morgan; POUZET, Sébastien; CASTELNAU, Olivier (Laser Institute of America, 2017)The laser metal deposition (LMD) laser technique is a free-form metal deposition process, which allows generating near net-shape structures through the interaction of a powder stream and a laser beam. A simplified numerical ...
Multiphysics Simulation and Experimental Investigation of Aluminum Wettability on a Titanium Substrate for Laser Welding-Brazing Process Article dans une revue avec comité de lectureDAL, Morgan; PEYRE, Patrice (MDPI, 2017)The control of metal wettability is a key-factor in the field of brazing or welding-brazing. The present paper deals with the numerical simulation of the whole phenomena occurring during the assembly of dissimilar alloys. ...
Analysis and possible estimation of keyhole depths evolution, using laser operating parameters and material properties Article dans une revue avec comité de lectureFABBRO, Rémy; DAL, Morgan; PEYRE, Patrice; COSTE, Frédéric; SCHNEIDER, Matthieu; GUNENTHIRAM, V (Laser Institute of America, 2018)The authors propose an analysis of the effect of various operating parameters on the keyhole depth during laser welding. The authors have developed a model that uses the analysis of the thermal field obtained in 2D geometry, ...
Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel Article dans une revue avec comité de lectureGUNENTHIRAM, Valérie; PEYRE, Patrice; SCHNEIDER, Matthieu; DAL, Morgan; COSTE, Frédéric; FABBRO, Rémy (Laser Institute of America, 2017)The laser powder bed fusion (LPBF) or powder-bed additive layer manufacturing process is now recognized as a high-potential manufacturing process for complex metallic parts. However, many technical issues are still to ...