Experimental characterization and numerical modeling of micromechanical damage under different stress states
Article dans une revue avec comité de lecture
Date
2013Journal
Materials and DesignRésumé
The use of HSLA steels for the manufacture of automotive components is interesting from an engineering point of view. This family of steels, while possessing high strength, also has good formability and can be used in forming manufacturing processes. In some forming processes such as blanking, shear strain localization occurs, which causes damage and results in the final fracture of the material. This paper presents an experimental study based on in situ tests to understand and identify the physical mechanisms of ductile damage under two stress states: tension and shear. Different macroscopic tests were performed to calibrate a damage model based on a micromechanical approach. This damage model is based on the Gurson–Tvergaard–Needleman theory and presents recent improvements proposed by Nahshon and Hutchinson and by Nielsen and Tvergaard so as to better predict fracture under a wide range of stress states, especially with low levels of stress triaxiality. These extensions have made the identification of the material parameter more complicated. In this work an identification strategy has been proposed using tests on specimens with different shapes. The identified parameter values are validated and the fracture model show good predictive capability over a wide stress state range.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureSequential sheet metal forming processes can result in the accumulation of work hardening and damage effects in the workpiece material. The mechanical strength of the final component depends on the “evolution” of these two ...
-
Communication avec acteACHOURI, Mohamed; GERMAIN, Guénaël; DAL SANTO, Philippe; SAIDANE, Delphine; CID ALFARO, Marcela V.; TEN HORN, Carel H.L.J. (Serbian Chamber of Engineers, Faculty of Civil Engineering, 2012)The objective of this work was to investigate thefailure behaviour of a HSLA steel component subjected to a bending unbending operation. This study was conducted through a combined experimental and numerical approach to ...
-
Communication avec acteThe optimization of automotive security components requires good knowledge of the material state after fabrication, particularly with respect to damage that may have been done to the material by the manufacturing process. ...
-
Article dans une revue avec comité de lectureACHOURI, Mohamed; GERMAIN, Guénaël; DAL SANTO, Philippe; LEBRUN, Jean-Lou; SAIDANE, Delphine (Trans Tech Publications, 2011)This work deals a contribution to ductile damage of High-Strength Low-Alloy (HSLA) steel steels under low stress triaxiality. This work is based on micrographics observations and in situ shear tests to examine the evolution ...
-
Article dans une revue avec comité de lectureA new extension of the Gurson damage model has been proposed recently to predict ductile fracture under shear dominated loads. The aim of this work is to verify the ability of this approach to simulate, in an accurate way, ...