Magnet Shape Optimization to Reduce Pulsating Torque for a Five-Phase Permanent-Magnet Low-Speed Machine
Article dans une revue avec comité de lecture
Date
2014Journal
IEEE Transactions on MagneticsRésumé
Five-phase Surface-Mounted Permanent Magnet (SMPM) machines can inherently produce a smooth electromagnetic torque which can be increased when using third harmonic current injection. To really take advantage of these characteristics, the rotor magnets can be shaped in order to obtain a back-emf with large third harmonic term. This is the scope of the paper. For the design specifications of a low speed marine propulsion machine, the following objective must be achieved: to significantly mitigate the pulsating torque without reducing the average torque bearing in mind the solution where the rotor is made with full pole-pitch magnets. An analytical field computation, called equivalent coil method, is developed in order to quicly explore the magnet geometries. Thus a procedure to optimize small trapezoid notches at the surface of the pole magnets is performed. Referring to the classical fully pole-pitch magnet shape, the solution found allows a substantial reduction of the pulsating torque without reducing the torque density. Furthermore, with regard to an equivalent three-phase machine, for the same copper losses, the average torque of the optimized five-phase machine can be potentially higher if the third harmonic current injection is implemented.
Fichier(s) constituant cette publication
- Nom:
- IRENAV_MAGNETICS_Scuiller_2014.pdf
- Taille:
- 1.275Mo
- Format:
- Description:
- Article accepté
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureFor three-phase induction machines supplied by sinusoidal current, it is usual to model the n-bar squirrel-cage by an equivalent two-phase circuit. For a multiphase induction machine which can be supplied with different ...
-
Article dans une revue avec comité de lectureDJEBARRI, Sofiane; CHARPENTIER, Jean-Frederic; BENBOUZID, Mohamed; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2015)This paper deals with the design and performance analysis of double stator axial flux permanent magnet generators for rim-driven marine current turbines (MCT). Indeed for submarine applications, drive train reliability is ...
-
Article dans une revue avec comité de lectureGONG, Jinlin; ZAHR, Hussein; TRABELSI, Mohamed; ASLAN, Bassel; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2018)In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particular Double-Polarity (DP) five-phase machine. ...
-
Multi-criteria based design approach of multiphase permanent magnet low speed synchronous machines Article dans une revue avec comité de lectureCHARPENTIER, Jean-Frederic; LETELLIER, Paul; SEMAIL, Eric; SCUILLER, Franck (Institution of Engineering and Technology, 2009)A design methodology dedicated to multi-phase permanent magnet synchronous machines (PMSMs) supplied by pulse width modulation voltage source inverters (PWM VSIs) is presented. First, opportunities for increasing torque ...
-
Communication avec acteThis paper deals with the global design of direct driven permanent magnet (PM) generator associated with fixedpitch turbine for tidal energy generation. A global design approach of the generator design is proposed which ...