Microstructure and properties of welds between 5754 Al alloys and AZ31 Mg alloys using a Yb:YAG laser
TypeCommunications avec actes
Dissimilar laser beam welding between A5754 Al alloy and AZ31 Mg alloy with the plate thickness of 2 mm was investigated. Complex flow pattern characterized by a large volume of intermetallic compounds Al12Mg17 and Al3Mg2 is formed in the fusion zone. Microhardness measurement of the dissimilar welds presents an uneven distribution due to the complicated microstructure of the weld, and the maximum value of microhardness in the fusion zone is much higher than of the base materials.
Showing items related by title, author, creator and subject.
The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds BANNOUR, Sana; ABDERRAZAK, Kamel; MATTEI, Simone; MASSE, Jean-Eric; AUTRIC, Michel; MHIRI, Hatem (Journal of Laser application, 2013)Structure and properties of laser beam welding zone of dissimilar materials, AZ31 magnesium alloy and A5754 Aluminum alloy, are investigated. The microstructure and quality of the Mg/Al weld were studied by metallography, ...
Excimer laser treatment of ZE41 magnesium alloy for corrosion resistance and microhardness improvement KHALFAOUI, Walid; VALÉRIO, Eric; MASSE, Jean-Eric; AUTRIC, Michel (Elsevier, 2010)A laser surface melting treatment (LSMT) was performed on a ZE41 Mg-alloy using an excimer KrF laser. The laser-melted layer depth depends on the laser scan speed. The morphology and the microstructure of the laser-melted ...
JEMAL, Nejah; MASSE, Jean-Eric; LANGLOIS, Laurent; TCHERNIAEFF, Serge; GIROT, Franck (CSC, 2010)Le procédé Friction Stir Welding qui peut se traduire en français par friction malaxage a été inventé par le TWI de Cambridge en 1991. La soudure est réalisée par apport de chaleur provoqué par le frottement d’un outil en ...
BELHADJ, Asma; BESSROUR, Jamel; MASSE, Jean-Eric; BOUHAFS, Mahmoud; BARRALLIER, Laurent (Elsevier, 2010)In this paper, a three-dimensional finite element model is developed to simulate thermal history magnesium-based alloys during laser beam welding. Space–time temperature distributions in weldments are predicted from the ...
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds COMMIN, Loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2012)Friction stir welding induces a microstructural evolution and residual stresses that will influence the resulting mechanical properties. Friction stir welds produced from magnesium alloy hot rolled plates were studied. ...