A generic methodology to improve the control of forging process parameters
TypeArticles dans des revues avec comité de lecture
One of the common problems in forging processes is the lack of key process parameters control, as well as their identification. Certain controlled parameters exist, such as temperature or stroke length, which are usually identified and controlled through a systematic approach. Their selection depends particularly on the part to produce or on customer’s constraints, rather than a rational approach. In this paper, a methodology is proposed to select the key process parameters. There are some methodologies which already exist, such as the DMAIC, which are used to determine the control parameters and their influences on the desired specifications. However, this approach has certain drawbacks. For example, the key parameters are selected by experts, which makes each case study time consuming. The aim is to develop a generic methodology to improve the manufacturing process in the forging industry. The methodology is represented as a decision support system that connects product specifications (geometry, absence of defects…) or other forging specifications (tool wear, involved energy...) to the process parameters. The latter will be able to define the key parameters, their values and their appropriate way of control. These links will be setup using the empirical rules and physical laws.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Forging process control: Influence of key parameters variation on product specifications deviations ALLAM, Zakaria; BECKER, Eric; BAUDOUIN, Cyrille; BIGOT, Régis; KRUMPIPE, Pierre (Elsevier / Takashi Ishikawa and Ken-ichiro Mori, 2014)Process control in forging industry is essential to ensure a better quality of the product with a lower cost at the end of the manufacturing process. To control the process, a number of key parameters must be monitored to ...
BECKER, Eric; CEZARD, Pierre; MATHIEU, Stéphane; BIGOT, Régis; LANGLOIS, Laurent (Association Française de Mécanique, 2007)Analyse l’influence de la vitesse du coulisseau et de la température du lopin (fraction liquide) sur le comportement de l’acier à l’état semi-solide en utilisant un nouvel outillage de filage direct monté sur une presse ...
BECKER, Eric; BIGOT, Régis; FAVEROLLE, Pierre (Elsevier, 2017)For nearly two decades, researchers from academia and industry are working on the development of steel alloys thixoforging, which are not the easiest to form with this process. The early fundamental technology research ...
BECKER, Eric; BIGOT, Régis; LANGLOIS, Laurent; FAVIER, Véronique; PIERRET, Jean-Christophe; CEZARD, Pierre (2008)Since always, Industry minimizes manufacturing process plan and increases mechanical behaviour. In this topic, the thixoforging process offers important perspectives especially steel thixoforging. It is on the way of ...
Impact of experimental conditions on material response during forming of steel in semi-solid state BECKER, Eric; FAVIER, Véronique; BIGOT, Régis; CEZARD, Pierre; LANGLOIS, Laurent (Elsevier, 2010)Semi-solid forming is an effective near-net-shape forming process to produce components with complex geometry and in fewer forming steps. It benefits from the complex thixotropic behaviour of semi-solids. However, the ...