Joint Stiffness Identification of a Heavy Kuka Robot with a Low-cost Clamped End-effector Procedure
Communication avec acte
Résumé
This paper proposes two new methods for the identification of static stiffnesses of multi degrees of freedom heavy industrial robots. They are based on a locked link joint procedure obtained with an end-effector fixed to the environment. The first method requires only measurements of motor positions and motor torques data computed from motor current measurements and manufacturer's drive gains. The second one needs a torque sensor to measure the interaction wrench between the clamped end-effector and the environment. These methods are being experimentally validated and compared on the 2 first joints of a 6 degrees of freedom heavy 500Kg payload industrial Kuka KR500 robot.
Fichier(s) constituant cette publication
- Nom:
- LCFC_ICINCO_2014_ABBA
- Taille:
- 959.5Ko
- Format:
- Description:
- communication ICINCO14
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Rapport de rechercheGAUTIER, Maxime; JUBIEN, Anthony; ABBA, Gabriel; QIN, Jinna (ENSAM, 2013)Ce rapport est décomposé en 8 parties. La seconde partie rappelle les bases de la modélisation des robots à architecture série et présente les modélisations des deux robots. La troisième présente les méthodes d'identification ...
-
Communication avec acteWANG, Ke; LEONARD, François; ABBA, Gabriel (IEEE/ASME, 2014)This paper proposes a new approach to simplify the dynamic model of industrial robot by means of interval method. Due to strong nonlinearities, some components of robot dynamic model such as the inertia matrix and the ...
-
Off-line path programming for three-dimensional robotic friction stir welding based on Bézier curves Article dans une revue avec comité de lectureKOLEGAIN, Komlan; LEONARD, François; ZIMMER-CHEVRET, Sandra; BEN ATTAR, Amarilys; ABBA, Gabriel (Emerald, 2018)Robotic friction stir welding (RFSW) is an innovative process which enables solid-state welding of aluminum parts using robots. A major drawback of this process is that the robot joints undergo elastic deformation during ...
-
Communication avec acteQIN, Jinna; LEONARD, François; ABBA, Gabriel (Elsevier/International Federation of Automatic Control, 2014)This paper demonstrates the solutions of digital observer implementation for industrial applications. A nonlinear high-gain discrete observer is proposed to compensate the tracking error due to the flexibility of robot ...
-
Communication avec acteKLIMCHIK, Alexandr; WU, Yier; ABBA, Gabriel; GARNIER, Sébastien; FURET, Benoit; PASHKEVICH, Anatol (IFAC, 2013)The paper focuses on the robust identification of geometrical and elastostatic parameters of robotic manipulator. The main attention is paid to the efficiency improvement of the identification algorithm. To increase the ...