Surface roughness prediction in milling based on tool displacements
Article dans une revue avec comité de lecture
Date
2011Journal
Journal of Manufacturing ProcessesAbstract
In this paper, an experimental device using non-contact displacement sensors for the investigation of milling tool behaviour is presented. It enables the recording of high frequency tool vibrations during milling operations. The aim of this study is related to the surface topography prediction using tool displacements and based on tool center point methodology. From the recorded signals and the machining parameters, the tool deformation is modeled. Then, from the calculated deflection, the surface topography in 3D can be predicted. In recent studies, displacements in XY plane have been measured to predict the surface topography in flank milling. In this article, the angular deflection of the tool is also considered. This leads to the prediction of surfaces obtained in flank milling as well as in end milling operations. Validation tests were carried out: the predicted profiles were compared to the measured profile. The results show that the prediction corresponds well in shape and amplitude with the measurement.
Files in this item
Collections
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureALCARAZ, Jean-Pierre; LE COQ, Laurence; POURCHEZ, Jérémie; THOMAS, Dominique; CHAZELET, Sandrine; BOUDRY, Isabelle; BARBADO, Maud; SILVENT, Sophie; DESSALE, Claire; ANTOINE, Fabienne; GUIMIER-PINGAULT, Catherine; CORTELLA, Laurent; ROUIF, Sophie; BARDIN-MONNIER, Nathalie; CHARVET, Augustin; DUFAUD, Olivier; LECLERC, Lara; MONTIGAUD, Yoann; LAURENT, Coralie; VERHOEVEN, Paul; JOUBERT, Aurélie; BOUHANGUEL, Ala; ANDRES, Yves; GAFFÉ, Joël; MARTIN, Donald K.; HUET, Christophe; BOISSET, Sandrine; MAURIN, Max; RUMEAU, Pascal; CHARLOT, Frédéric; MOREAU-GAUDRY, Alexandre; BONNETERRE, Vincent; CINQUIN, Philippe; LANDELLE, Caroline; RICHAUD, Emmanuel (Elsevier, 2021)The need for personal protective equipment increased exponentially in response to the Covid-19 pandemic. To cope with the mask shortage during springtime 2020, a French consortium was created to find ways to reuse medical ...
-
Communication sans acteSELMI, Jaouher; COSTES, Jean-Philippe; CARRAS, Patrice; LORONG, Philippe; POULACHON, Gerard (Congrès Français de Mécanique, 2013)Machine tool is the most used manufacturing means in automotive industry. This kind of manufacturing machine is very expensive and has immediate influence on produced workpiece quality. During machining process design, a ...
-
Communication avec acteSELMI, Jaouher; COSTES, Jean-Philippe; CARRAS, Patrice; LORONG, Philippe; POULACHON, Gerard (MM Science Journal, 2014)It is proposed to apply a methodology in order to evaluate the ability of different machining systems (Spindle/Tool) to run a reaming process in a stable way.The methodology is based on an experimental measurement of the ...
-
Communication avec acteUne méthodologie est proposée dans cet article dans le but de faciliter l’évaluation de la stabilité d’une opération de fraisage, pour une broche, un outil et une position connue de la broche dans son espace de travail. ...
-
Article dans une revue avec comité de lectureSELMI, Jaouher; COSTES, Jean-Philippe; CARRAS, Patrice; LORONG, Philippe; POULACHON, Gerard (Springer Verlag, 2016)This article presents an original study about the dynamic of a machining operation based on the coupling receptance methodology. The Frequency Response Function (FRF) of a machine tool is numerically coupled with the FRF ...