Influence of injection molding on the electrical properties of polyamide 12 filled with multi-walled carbon nanotubes
Article dans une revue avec comité de lecture
Abstract
Microinjection-molded and compression-molded polyamide (PA12) matrix composites filled with 0.67, 1.33, 2 and 4 wt% multi-walled carbon nanotubes (MWNTs) were prepared from twin-screw extruded pellets. The compression molded samples have an electrical percolation threshold close to 1.2 wt%. Coupled rheological and electrical measurements show that their electrical properties start decreasing as soon as shear begins and are partially restored during flow, suggesting successively breakage and reconstruction of a percolating network. On the other hand, the electrical properties of the microinjection molded composites are close to the matrix ones, showing that cooling is too fast for the MWNTs to form a network. There is some electrical anisotropy in these composites, as evidenced by a greater conductivity measured in the flow direction. However polarized Raman spectroscopy analysis does not reveal a significant orientation of the MWNTs.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureALCARAZ, Jean-Pierre; LE COQ, Laurence; POURCHEZ, Jérémie; THOMAS, Dominique; CHAZELET, Sandrine; BOUDRY, Isabelle; BARBADO, Maud; SILVENT, Sophie; DESSALE, Claire; ANTOINE, Fabienne; GUIMIER-PINGAULT, Catherine; CORTELLA, Laurent; ROUIF, Sophie; BARDIN-MONNIER, Nathalie; CHARVET, Augustin; DUFAUD, Olivier; LECLERC, Lara; MONTIGAUD, Yoann; LAURENT, Coralie; VERHOEVEN, Paul; JOUBERT, Aurélie; BOUHANGUEL, Ala; ANDRES, Yves; GAFFÉ, Joël; MARTIN, Donald K.; HUET, Christophe; BOISSET, Sandrine; MAURIN, Max; RUMEAU, Pascal; CHARLOT, Frédéric; RICHAUD, Emmanuel; MOREAU-GAUDRY, Alexandre; BONNETERRE, Vincent; CINQUIN, Philippe; LANDELLE, Caroline (Elsevier, 2021)The need for personal protective equipment increased exponentially in response to the Covid-19 pandemic. To cope with the mask shortage during springtime 2020, a French consortium was created to find ways to reuse medical ...
-
Article dans une revue avec comité de lectureBERTHE, Laurent; ARRIGONI, Michel; BOUSTIE, Michel; CUQ-LELANDAIS, Jean Paul; BROUSSILLOU, Cédric; FABRE, Grégory; JEANDIN, Michel; GUIPONT, Vincent; NIVARD, Mariette (Taylor & Francis, 2011)This paper proposes a state-of-the-art laser adhesion test. It consists of testing material interfaces with laser-driven shock wave. Since the first demonstration in the 1980s by Vossen, many studies and developments have ...
-
Article dans une revue avec comité de lectureJACQUEMAIN, Vincent; RANC, Nicolas; CHEULEU, Christophe; MICHEL, Vincent; FAVIER, Véronique; CASTELNAU, Olivier; VINCI, Doriana; THIAUDIERE, Dominique; MOCUTA, Christian (Elsevier BV, 2021)Piezo-electric ultrasonic fatigue machines are used to carry out fatigue tests more rapidly than what is possible using other technologies, at a frequency of . The very high cycle fatigue (VHCF) domain can be studied with ...
-
Article dans une revue avec comité de lectureFROGER, Vincent; DABOS-SEIGNON, Sylvie; NOËL, Sophie; CHAPRON, David; BOUTEVILLE, Anne (2014)In this work, magnesium doped zinc oxide (Zn1-xMgxO) thin films were deposited using an original infrared assisted Spray Chemical Vapor Deposition (Spray-CVD) technique on borosilicate glass substrates. With a simple, safe ...
-
Article dans une revue avec comité de lectureTAUPIN, Vincent; PESCI, Raphaël; BERBENNI, Stéphane; BERVEILLER, Sophie; OUAHAB, Razane; BOUAZIZ, Olivier (Elsevier, 2013)In situ tensile tests were performed at room temperature on a ferrite–cementite steel specifically designed for this study. The evolution of the average stress in ferrite during loading was analyzed by X-ray diffraction.Lattice ...