Effects of microstructure and local mechanical fields on intergranular stress corrosion cracking of a friction stir welded aluminum–copper–lithium 2050 nugget
TypeArticles dans des revues avec comité de lecture
The effects of the microstructure and mechanical fields on intergranular stress corrosion cracking (IGSCC) of the nugget zone of heat treated welds obtained by friction stir welding in the AA2050 aluminum alloy have been investigated at different scales. At low strain rate, in 1.0 NaCl aqueous solution, IGSCC develops in the microstructure, whereas only pitting corrosion is observed without any mechanical stress. Based on surface observations, EBSD analysis and X-ray tomography, the key role of sub-millimetric textured bands (induced by the welding process) on the IGSCC is demonstrated. Analyses at a more local scale show the grain boundary (low angle boundary, special coincident site lattice boundary or high angle boundary) do not have a significant effect on crack initiation. Crystal plasticity finite element calculations show that the threshold normal stress at grain boundaries for IGSCC development is about 80% of the macroscopic stress. It is also highlighted by crystal plasticity calculations that there is a drastic effect of the local stress field on the shape of cracks. Finally, it is shown that plasticity induced residual stresses are sufficient for the formation of IGSCC. © 2014 Elsevier Ltd.
Showing items related by title, author, creator and subject.
Mechanical behavior of periodical microstructure induced by friction stir welding on Al–Cu–Li 2050 alloy DHONDT, Matthieu; AUBERT, Isabelle; SAINTIER, Nicolas; OLIVE, Jean-Marc (Elsevier, 2015)Mechanical behavior analysis of the friction stir weld nugget of an aluminum alloy 2050 reveals a major role of the microstructure which varies with the distance to the weld surface. Three types of microstructure heterogeneities ...
A methodology to obtain data at the slip-band scale from atomic force microscopy observations and crystal plasticity simulations. Application to hydrogen-induced slip localization on AISI 316L stainless steel AUBERT, Isabelle; SAINTIER, Nicolas; OLIVE, Jean-Marc; PLESSIER, François (elsevier, 2016)A local approach coupling atomic force microscopy (AFM) observations and polycrystal finite element calculations is proposed to provide data at the slip-band scale. From AFM measurements of slip bands emerging at the ...
Analyses of hydrogen distribution around fatigue crack on type 304 stainless steel using secondary ion mass spectrometry SAINTIER, Nicolas; AWANE, T; OLIVE, Jean-Michel; MATSUOKA, Shuzo; MURAKAMI, Yoko (Elsevier BV, 2011)Secondary Ion Mass Spectrometry (SIMS) analyses were carried out on type 304 austenitic stainless steel. On annealed specimen exposed to hydrogen (10 MPa, 358 K), Element Depth Profiles SIMS mode was able to describe ...
PHOEMSAPTHAWEE, Surasak; LE BOULLUEC, Marc; LAURENS, Jean-Marc; DENISET, François (Springer, 2013)Underwater gliders are recent innovative types of autonomous underwater vehicles (AUVs) used in ocean exploration and observation. They adjust their buoyancy to dive and to return to the ocean surface. During the change ...
Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-hybrid Automotive Application BRUYERE, Antoine; SEMAIL, Eric; BOUSCAYROL, Alain; CHARLEY, Jacques; LOCMENT, Fabrice; DUBUS, Jean-Marc; MIPO, Jean-Claude (IEEE, 2008)This paper deals with the modeling and the control of a new high power 12V Integrated Starter Alternator (ISA). This system is used to bring micro-hybrid functions to standard Internal Combustion Engine (ICE) vehicles. The ...