AK-ILS: An Active learning method based on Kriging for the Inspection of Large Surfaces
Article dans une revue avec comité de lecture
Tolerance verification permits to check the product conformity and to verify assumptions made by the designer. For conformity assessment, the uncertainty associated with the values of the measurands must be known. In fact, to evaluate form characteristics of large aircraft structure workpieces, sampling is required, so a measurement error is present: exact estimation of form characteristics would require complete knowledge of the surface. To minimise this measurement error, this paper presents a Krigingbased procedure to identify the minimum of measured points to check the conformity with a given confidence level. The proposed method is validated on a simple example of orientation tolerance and then performed to inspect the form defect on three large aircraft workpieces.
Showing items related by title, author, creator and subject.
Impact of a behavior model linearization strategy on the tolerance analysis of over-constrained mechanisms Article dans une revue avec comité de lectureDUMAS, Antoine; DANTAN, Jean-Yves; GAYTON, Nicolas (Elsevier, 2015)All manufactured products have geometrical variations which may impact their functional behavior. Tolerance analysis aims at analyzing the influence of these variations on product behavior, the goal being to evaluate the ...
Communication avec acteDANTAN, Jean-Yves; GAYTON, Nicolas; ETIENNE, Alain; QURESHI, Ahmed Jawad; DUMAS, Antoine (AIP PRIMECA, 2012)The aim of this paper is to provide an overview of tolerance analysis. Tolerancing decisions can profoundly impact the quality and cost of product. There is a strong need for increased attention to tolerance design to ...
Article dans une revue avec comité de lectureDUMAS, Antoine; GAYTON, Nicolas; DANTAN, Jean-Yves; SUDRET, Bruno (Elsevier, 2015)The goal of tolerance analysis is to verify whether design tolerances enable a mechanism to be functional. The current method consists in computing a probability of failure using Monte Carlo simulation combined with an ...
Article dans une revue avec comité de lectureDUMAS, Antoine; DANTAN, Jean-Yves; GAYTON, Nicolas; BLES, Thomas; LOEBL, Robin (2015)Tolerance analysis consists of analyzing the impact of variations on the mechanism behavior due to the manufacturing process. The goal is to predict its quality level at the design stage. The technique involves computing ...
A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation Article dans une revue avec comité de lectureQURESHI, Ahmed Jawad; DANTAN, Jean-Yves; SABRI, Vahid; BEAUCAIRE, Paul; GAYTON, Nicolas (Elsevier, 2012)Tolerancing decisions can profoundly impact the quality and cost of the mechanism. To evaluate the impact of tolerance on mechanism quality, designers need to simulate the influences of tolerances with respect to the ...