URANSE simulation of an active variable-pitch cross-flow Darrieus tidal turbine: Sinusoidal pitch function investigation
TypeArticles dans des revues avec comité de lecture
This article describes a 2D CFD simulation implementation of a crossflow tidal turbine, the blades of which have their pitch modified during revolution. Unsteady flow around the turbine is computed with an URANSE method, using the solver ANSYS-CFX. Spatial and temporal discretizations have been studied. The pitch motion of the blades is obtained through mesh deformation, and the main rotation is implemented through sliding boundaries, with general grid interface model. The turbulence model used is kx SST. Langtry Menter transition model was tried but showed high discrepancies with experimental results. Five experimental cases were used to assess the accuracy of the simulation. It provided accurate computed forces for a wide range of tip speed ratios, and proved to be suitable for exploratory simulations. Harmonic pitch control was thus implemented for a tip speed ratio of 5, close to an operational value for a crossflow turbine. First, second and third harmonics pitch function were tested. It was shown that an improvement of more than 50% could be achieved with the second harmonics, with a large reduction in thrust. The flow inside the turbine and close to the blade was examined so that the case of performance improvement due to pitch control could be clearly understood. It was observed that turbine efficiency improvement requires a very slight recirculation and an angle of attack decrease on the upstream part of the turbine, and an angle of attack increase on the downstream part. The flow deceleration through the turbine was found to be a primary factor in pitch function as well. Moreover the hydrodynamic torque and thus the energy required to control the pitch were found to be insignificant.
Showing items related by title, author, creator and subject.
Simulating variable pitch crossflow water turbines: A coupled unsteady ONERA-EDLIN model and streamtube model PAILLARD, Benoît; HAUVILLE, Frédéric; ASTOLFI, Jacques Andre (ELSEVIER, 2013)This article describes a new method for simulating unsteady hydrodynamics forces and moments on the blades of a crossflow ‘Darrieus’ turbine with active pitch variation. This method is based on the ONERAEDLIN dynamic stall ...
DROUEN, Laurent; CHARPENTIER, Jean-Frederic; HAUVILLE, Frédéric; ASTOLFI, Jacques Andre; SEMAIL, Eric; CLENET, Stéphane (SHF, 2013)Le travail présenté concerne le développement d’une méthodologie de conception de systèmes hydroliens innovants de type RIM-DRIVEN pour la récupération de l’énergie des courants de marée. L’originalité d’un système RIM-DRIVEN ...
DROUEN, Laurent; CHARPENTIER, Jean-Frederic; HAUVILLE, Frédéric; ASTOLFI, Jacques Andre; SEMAIL, Eric; CLENET, Stéphane (Société Hydrotechnique de France (SHF), 2015)Le travail présenté concerne le développement d’une méthodologie de conception de systèmes hydroliens innovants de type RIM‑DRIVEN pour la récupération de l’énergie des courants de marée. L’originalité d’un système RIM‑DRIVEN ...
SACHER, Matthieu; DUVIGNEAU, Régis; LE MAÎTRE, Olivier; DURAND, Mathieu; BERRINI, Elisa; HAUVILLE, Frédéric; ASTOLFI, Jacques-André (Springer Nature, 2018)Gaussian-Process based optimization methods have become very popular in recent years for the global optimization of complex systems with high computational costs. These methods rely on the sequential construction of a ...
SACHER, Matthieu; DURAND, Mathieu; BERRINI, Elisa; HAUVILLE, Frédéric; DUVIGNEAU, Régis; LE MAITRE, Olivier; ASTOLFI, Jacques-André (2017)This paper investigates the use of constrained surrogate models to solve the multi-design optimization problem of a flexible hydrofoil. The surrogate-based optimization (EGO) substitutes the complex objective function of ...