Model-Order Reduction of Multiple-Input Non-Linear Systems Based on POD and DEI Methods
Article dans une revue avec comité de lecture
Auteur
HENNERON, Thomas 
CLENET, StephaneRésumé
The proper orthogonal decomposition combined with the discrete empirical interpolation method is investigated in order to reduce a finite-element model of a multiple-input non-linear device. The non-linear reduced problem is solved using the Newton-Raphson method. The transient state of a three-phase transformer with a variable load is studied with the proposed reduction method for different supply voltage conditions.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arnoldi-Based Krylov Methods Communication avec acte; ; ;CLENET, Stephane (IEEE, 2015)
The proper orthogonal decomposition method and Arnoldi-based Krylov projection method are investigated in order to reduce a finite-element model of a quasi-static problem. Both methods are compared on an academic example ...
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2016)
To study a multirate system, each subsystem can be solved by a dedicated sofware with respect to the physical problem and the time constant. Then, the problem is the coupling of the solutions of the subsystems. The Waveform ...
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2014)
We present an optimization problem that requires to model a multirate system, composed of subsystems with different time constants. We use waveform relaxation method in order to simulate such a system. But computation time ...
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Wydawnictwo Czasopism i Ksia̜żek Technicznych Sigma, 2015)
The modelling of a multirate system -composed of components with heterogeneous time constants- can be done using fixed-point method. This method allows a time-discretization of each subsystem with respect to its own time ...
-
Article dans une revue avec comité de lecture;CLENET, Stephane (EDP Sciences, 2013)
In order to reduce the computation time of a quasi-static problem solved by the nite element method, methods of model order reduction can be applied. In this context, two approaches, the Proper Orthogonal Decomposition ...