Ballistic behavior of steel sheet subjected to impact and perforation
TypeArticles dans des revues avec comité de lecture
The paper is reporting some comparisons between experimental and numerical results in terms of failure mode, failure time and ballistic properties of mild steel sheet. Several projectile shapes have been considered to take into account the stress triaxiality effect on the failure mode during impact, penetration and perforation. The initial and residual velocities as well as the failure time have been measured during the tests to estimate more physical quantities. It has to be noticed that the failure time was defined using a High Speed Camera (HSC). Thanks to it, the impact forces (average and maximum level), were analyzed using numerical simulations together with an analytical description coupled to experimental observations. The key point of the model is the consideration of a shape function to define the pulse loading during perforation.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation KPENYIGBA, K. M.; JANKOWIAK, Tomasz; RUSINEK, Alexis; PESCI, Raphaël (Elsevier, 2013)The paper describes a work focused on the process of perforation of steel sheet.Experimental,analytical and numerical investigations have been carried out to analyze in details the perforation process.Based on these ...
KPENYIGBA, K. M.; JANKOWIAK, Tomasz; RUSINEK, Alexis; PESCI, Raphaël; WANG, Bin (Elsevier, 2015)In this paper an experimental and numerical work is reported concerning the process of perforation of thin steel plates using different projectile nose shapes. The main goal is to analyze how the projectile shape may change ...
Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperatures RODRIGUEZ MARTINEZ, José Antonio; PESCI, Raphaël; RUSINEK, Alexis; ARIAS, Angel; ZAERA, Ramon; PEDROCHE, David Arias (Elsevier, 2012)This paper presents and analyzes the behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles. The relevance of this material resides in the potential transformation of retained ...
Experimental characterisation and modelling of the thermo-viscoplastic behaviour of steel AISI 304 within wide ranges of strain rate at room temperature RUSINEK, Alexis; RODRIGUEZ-MARTINEZ, José A.; PESCI, Raphaël; CAPELLE, Julien (Polish Society of Theoretical and Allied Mechanics, 2010)In this investigation, thermo-viscoplastic behaviour of austenitic steel AISI 304 has been characterised in tension under wide ranges of strain rate at room temperature. This metal possesses an elevated strain hardening ...
Experimental and numerical analysis on the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles RODRIGUEZ MARTINEZ, José Antonio; RUSINEK, Alexis; PESCI, Raphaël; ZAERA, Ramon (Elsevier, 2013)In this work, an experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles is conducted. Experiments are performed using ...