Mechanical properties, microstructure and crystallographic texture of magnesium AZ91-D alloy welded by Friction Stir Welding (FSW)
TypeArticles dans des revues avec comité de lecture
The objective of the study was to characterize the properties of a magnesium alloy welded by friction stir welding (FSW). The results led to a better understanding of the relationship between this process and the microstructure and anisotropic properties of alloy materials. Welding principally leads to a large reduction in grain size in welded zones due to the phenomenon of dynamic recrystallization. The most remarkable observation was that crystallographic textures appeared from a base metal without texture in two zones: the thermo-mechanically affected and stir welded zones. The latter zone has the peculiarity of possessing a marked texture with two components on the basal plane and the pyramidal plane. These characteristics disappeared in the TMAZ, which had only one component following the basal plane. These modifications have been explained by the nature of the plastic deformation in these zones, which occurs at a moderate temperature in the TMAZ and high temperature in the SWZ.
Showing items related by title, author, creator and subject.
BELHADJ, Asma; BESSROUR, Jamel; MASSE, Jean-Eric; BOUHAFS, Mahmoud; BARRALLIER, Laurent (Elsevier, 2010)In this paper, a three-dimensional finite element model is developed to simulate thermal history magnesium-based alloys during laser beam welding. Space–time temperature distributions in weldments are predicted from the ...
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds COMMIN, loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2012)Friction stir welding induces a microstructural evolution and residual stresses that will influence the resulting mechanical properties. Friction stir welds produced from magnesium alloy hot rolled plates were studied. ...
A Thermodynamic and experimental study of low-alloy steels after carbonitriding in a low-pressure atmosphere MARRAY, Tarek; JACQUET, Philippe; MANSORI, Mohammed; FABRE, Agnès; BARRALLIER, Laurent (Springer, 2014)The effect of the composition of two steels (B and 6MnCr5) on precipitation of undesirable phases (carbides, nitrides and carbonitrides) under thermochemical treatment (low-pressure or vacuum carbonitriding) is investigated. ...
On the twinning impact on the grain structure formation of multi-crystalline silicon for photovoltaic applications during directional solidification RIBERI-BÉRIDOT, Thècle; MANGELINCK-NOËL, Nathalie; TANDJAOUI, Amina; REINHART, Guillaume; BILLIA, Bernard; LAFFORD, Tamzin; BARUCHEL, José; BARRALLIER, Laurent (Elsevier, 2015)Grain orientation and competition during growth has been analyzed in directionally solidiﬁed multi-crystalline silicon samples. In situ and real-time characterization of the evolution of the grain structure during growth ...