Influence of thermal diffusion and shear-thinning during the leveling of nanoimprinted patterns in a polystyrene thin film
Article dans une revue avec comité de lecture
Auteur
TEYSSEDRE, Hubert
40214 Commissariat à l'énergie atomique et aux énergies alternatives - Laboratoire d'Electronique et de Technologie de l'Information [CEA-LETI]
40214 Commissariat à l'énergie atomique et aux énergies alternatives - Laboratoire d'Electronique et de Technologie de l'Information [CEA-LETI]
Date
2015Journal
Applied physics. A, Materials science & processingRésumé
When capillary forces prevail, the leveling of the free surface of a fluid film is a natural phenomenon that has already found applicative interest either with brushmarks for paint coatings or for rheology on polymeric thin films. Among many parameters, the material behavior influences notably this phenomenon and its characterization still arouses curiosity at the nanoscale. In this article the nanoscale properties of a polystyrene film are derived from the leveling rate of nanoimprinted patterns and are compared to bulk values obtained with a parallel plate rheometer. In particular the focus is made on the isothermal assumption during the process and the consequences of an anisothermal state on the material behavior. Both points are investigated by using numerical simulations based on the natural element method. First we demonstrate experimentally that the leveling rate is influenced by the heat exchange at the air-polymer interface and that thermal diffusion should be taken into account within the film and its underlying substrate. Then we numerically investigate the influence of thermal diffusion and shear-thinning on the leveling rate. Finally we show that the bulk properties can represent particularly closely the behavior of the polymer at the nanoscale if adequate thermal boundary conditions are used and if shear-thinning is taken into account. This agreement postulates a decrease by 7◦C of the mean temperature of the polystyrene film coated on silicon when experiments are carried out on a hotplate at 100◦C in a cleanroom environment.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureNanoimprint lithography is an efficient way to reproduce nanostructures down to 20 nanometers in sub-micrometer polymeric films. To optimize this process, simulation using a Newtonian behavior is a cheap and efficient way ...
-
Article dans une revue avec comité de lectureA quick evaluation of the forces involved in nanoimprint would be very helpful in the prevention of mold deflection. Unfortunately, it is shown here that assuming simplified flows may lead to quite incorrect evaluations ...
-
Article dans une revue avec comité de lectureTEYSSEDRE, Hubert; GILORMINI, Pierre (Elsevier, 2013)The natural element method is used to simulate two-dimensional viscous flows where interfacial effects must be taken into account, for application to polymer melts at the micro and nano scales. The variational formulation ...
-
Article dans une revue avec comité de lectureGILORMINI, Pierre; TEYSSEDRE, Hubert (Royal Society, The, 2013)Measuring the relaxation time involved in the leveling of the free surface of a Newtonian fluid laid on a substrate can give access to material parameters. It is shown here how most favorable pattern geometries of the free ...
-
Article dans une revue avec comité de lectureIn order to simulate the thermoforming of a transparency, constitutive equations are proposed for the nonlinear viscoelastic behaviour of poly(methyl methacrylate) near glass transition temperature, which include large ...