SAM: Soumissions récentes
Voici les éléments 3416-3422 de 6547
-
Article dans une revue avec comité de lecture; ;
SIADAT, Ali; ETIENNE, Alain (Taylor & Francis, 2016)
A process-oriented risk assessment methodology is proposed. Risks involved in a process and the corresponding risk factors are identified through an objectives-oriented risk identification approach and evaluated qualitatively ... -
Article dans une revue avec comité de lecture; ;SHIRINBAYAN, Mohammadali; ; ; BENFRIHA, Khaled; TCHARKHTCHI, Abbas; BAKIR, Farid (Springer Verlag, 2019)
n this work, the rotational molding process is developed to manufacture in one piece an axial-flow turbomachine rotor with hollow blades. Giving to our knowledge, this process has never been employed in the making of these ...
-
Article dans une revue avec comité de lecture; ;EL MANSORI, Mohamed; MKADDEM, Ali (Elsevier, 2016)
This work addresses the tribological reliability of TiAlN-based PVD coatings face to TiN-based CVD coating in cutting FRP. Wear and linear pin-on-plate tests were conducted on both glass/epoxy and carbon/epoxy composites ...
-
Article dans une revue avec comité de lecture; ; ; ; ;EL MANSORI, Mohamed (Society of Manufacturing Engineers, 2016)
tAA6016-T4 aluminium and DX56D + Z140M steel sheets were joined by fluxless laser weld-brazing pro-cess in industrial conditions and at high brazing speed reaching 6 m/min with ER4043 AlSi5filler wire. Theconfiguration ...
-
Article dans une revue avec comité de lecture;MAREAU, Charles; SAINTIER, Nicolas; MOREL, Franck (Elsevier, 2018)
Geometrical defects are known to have a detrimental influence on the high cycle fatigue resistance of metallic alloys, smaller defects being less harmful. In this experimental work, the influence of the defect size on the ...
-
Article dans une revue avec comité de lectureGUÉRARD, Sandra; ; ; (Wiley, 2017)
Background/Aim: It is difficult to characterize the impact behavior of mouthguards on the basis of their components. Impact behavior tests should be performed on mouthguard formed to simulate their intra-oral performance. ...
-
Article dans une revue avec comité de lecture; ; ;ROUCOULES, Lionel (2016)
The use of materials derived from biomass is unavoidable to decrease environmental impact of products. The main advantage of the Additive Manufacturing (AM) concept is the ability to create complex geometries one layer at ...
