Analysis of Indirect Measurement of Cutting Forces Turning Metal Cylindrical Shells
TypeCommunications avec actes
Cutting forces measurement is an important component of the ma- chining processes development and control. The use of conventional direct meas- urement systems is often impossible as they interfere in the process’s dynamics. This work proposes a method of cutting force indirect estimation during turning thin-walled cylindrical shells. Calculation of the flexibility matrix has enabled us to relate measured displacements of certain workpiece’s points to the cutting force. An optimization approach for choosing the measurement points location has been proposed, based on the best conditioning of the flexibility matrix.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Analytical modeling of a thin-walled cylindrical workpiece during the turning process. Stability analysis of a cutting process GERASIMENKO, Artem; GUSKOV, Mikhail; GOUSKOV, Alexander; LORONG, Philippe; SHOKHIN, Alexander (2017)The purpose of this work is to develop a mathematical model of the dynamics of turning a thin-walled cylindrical shell. This model uses a finite number of degrees of freedom and takes into account the variability of dynamic ...
GERASIMENKO, Artem; GUSKOV, Mikhail; DUCHEMIN, Jérôme; LORONG, Philippe; GOUSKOV, Alexander (ELSEVIER, 2015)Thin tubular parts are often subject to turning process during manufacturing. The increasing compliance of the workpiece, which is associated to tool displacement and to matter removal, can give rise to chatter, leading ...
GERASIMENKO, Artem; GUSKOV, Mikhail; LORONG, Philippe; DUCHEMIN, Jérôme; GOUSKOV, Alexander (2016)Chatter prediction is nowadays frequently carried out for machining operations involving deformable parts or tools. These analyses are commonly based on the uncoupled elements of the system: frequency response of the ...
Prediction of milling-induced vibrations in machining complex parts : numerical and experimental investigation DUCHEMIN, Jérôme; GUSKOV, Mikhail; LORONG, Philippe (CMVA, 2014)Avoiding vibrations during machining is an important issue for industry. When dealing with chatter prediction with a numerical approach, several models are required: dynamical models of the workpiece and tool, cutting ...
COFFIGNAL, Gérard; DUCHEMIN, Jérôme; ILLOUL, Lounès; GENGEMBRE, Christophe; GUSKOV, Mikhail; LORONG, Philippe (2013)Présentation concernant la modélisation des phénomènes dynamiques en usinage. Cette modélisation a pour particularité de permettre la prédiction de la géométrie des surfaces usinées (défauts de forme, d'ondulation) que la ...